Great Lakes Oil Co., - Straight Cutting Oils

CUTTING OILS (neat)

Shell Garia Oils: with Chlorine

Light colored, anti-mist, active sulfur cutting oils designed for use in moderate to severe machining operations.

Garia 421CM-12
Low viscosity cutting oil particularly suited for deep hole drilling, grinding, and other operations where a low viscosity cutting oil would be preferred. Chips and grinding swarf readily settle and loss of oil due to carry-off with the chips is also low.

Shell Garia Oils: Chlorine free

Light colored, anti-mist, active sulfur cutting oils designed for use in moderate to severe machining operations.

Garia 421M-12
Low viscosity cutting oil particularly suited for deep hole drilling, grinding, and other operations where a low viscosity cutting oil would be preferred. Chips and grinding swarf readily settle and loss of oil due to carry-off with the chips is also low.

Garia 422CM-36
Can be used in a wide variety of operations where the machining requirements range from moderate to severe. Contains no fatty oil and are therefore particularly useful in operations where surface finish is not critical. Also recommended for use in some of the more severe grinding operations where products containing fat could lead to loading of the grinding wheel.

Garia 421M-36
Can be used in a wide variety of operations where the machining requirements range from moderate to severe. Contains no fatty oil and are therefore particularly useful in operations where surface finish is not critical.

Garia 621CM-36
Useful in an extremely wide range of applications and are particularly useful in difficult applications where surface finish is of extreme importance. Particularly useful in form grinding applications and in deep hole drilling operations of metals and alloys with very low mach inability ratings.

Garia 621M-36
Useful in an extremely wide range of applications and are particularly useful in difficult applications where surface finish is of extreme importance. Particularly useful in form grinding applications and in deep hole drilling operations of metals and alloys with very low mach inability ratings.

Garia 623CS-52
Has the highest levels of EP of all the products in this series and can be used where most other cutting oils fail. Can handle the most difficult operations and can machine the most difficult metals and alloys.

Garia 623S-54
Has the highest levels of EP of all the products in this series and can be used where most other cutting oils fail. Can handle the most difficult operations and can machine the most difficult metals and alloys.

* We also blend our own Industrial Oils, Coolants, Cutting Oils, EDM Fluids, Quench Oils, Heavy Duty Tapping Oils, Rust Inhibitors, Alkaline Cleaners, Way Lubricants, Spindle Oils & Gear Lubricants.*

Garia 622S-34
Can be used to machine even the most difficult of metals. It is particularly suited for the machining of titanium and its alloys since it contains no chlorinated additive that may react with the metal and weaken the surface.

Shell Garia Alum-Mag Oils:
Particularly suited for the machining of magnesium where the use of a water reducible metalworking fluid could be hazardous.

* See our Filtration Equipment for Quench Oils, EDM Oils, Hydraulic Oils, Coolants, & other water-based products*

Garia Alum-Mag Oil
Intended especially for the machining and grinding of aluminum, magnesium, and their alloys. It is also suited for grinding of other high machineability rating ferrous and non-ferrous metals when an extreme pressure product is not required.

Garia Alum-Mag Special
Mildly compounded product recommended for the light-duty machining and grinding of steel, aluminum, and magnesium where improved surface finish is required.

Shell Garia Extra Oil 38
Compounded mineral oil containing high quality fatty oil. It was developed for use in a wide variety of machining operations, as a supplement to the fluid used where a superior surface finish was required. Recommended for machining metals and alloys where active sulfur type fluids cannot be used. Also recommended as a supplement to other cutting oils to increase surface finish.

Shell Macron Oils: with Chlorine

Transparent, light colored cutting oils formulated from high quality severely hydro processed based stocks with a naturally high viscosity index. Tripurpose because they can be used as the hydraulic oil, machine lube and cutting oil in machine tools such as automatic screw machines and NC/CNC machining centers.

Macron 221CM-32
Macron 222CM-58
Formulated with a conventional chlorinated extreme pressure additive. The EP properties allow faster machining rates, provide extended tool life, and protect against staining of yellow metals.
Has high flash points, minimizing the potential for fire.

Shell Macron Oils: Chlorine free

Transparent, light colored cutting oils formulated from high quality severely hydro processed based stocks with a naturally high viscosity index. Tripurpose because they can be used as the hydraulic oil, machine lube and cutting oil in machine tools such as automatic screw machines and NC/CNC machining centers.

Macron 221M-32
Macron 222M-70
Macron 223M-37
Macron 224M-70
Utilizes a unique combination of passive and inactive extreme pressure additives. Contains a special lubricity additive that will impart a better finish on the part without varnish or sludge formation in the machine tool or hydraulic system. Has high flash points, minimizing the potential for fire.

Shell Macron EDM Oil 135
High quality electrical discharge machining oil. Formulated with a highly refined, narrow cut paraffinic base stock. It is colorless and virtually odorless which provides a cleaner and more pleasant atmosphere. Low viscosity of the fluid provides good circulation through the spark gap and more rapid removal and settling of metal fines. Extremely effective as a glass grinding fluid.

GLOC WIRE EDM RP
High quality, water soluble corrosion inhibitor for use in electrical discharge machine fluids that use water. This product inhibits corrosion and aids in particle filtration. Heavy concentrate with high quality additives that provide excellent corrosion protection, preventing the build up of rust on work pieces and non-stainless holders.
Performance Qualities
Environmentally friendly, low usage, clean & non-ionic.

GLOC-EDM OIL
An electrical discharge machine fluid to be used as received. This outstanding product exhibits excellent resistance to oxidation and is easily filtered. Particles quickly settle out due to the low viscosity of this product. With its relatively high flash point and non-corrosive traits this product is operator accepted.
Performance Qualities
Relatively high flash point, better flushing, mild to the skins, good for use with all metals, good dielectric strength.

SYN 500 EDM
Synthetic hydrocarbon based electrical discharge machine fluid. Excellent thermal and oxidation stability which results in long fluid life.

SYN EDM PLUS+
A state of the art synthetic dielectric fluid formulated to maintain the highest performance characteristics over significantly extended service life. Out performs the common EDM fluids in the oxidation stability characteristics, resistance to thermal degradation & sludge formation. Its high flash point reduces the risk of fire, while its consistent viscosity helps to deliver better & more predictable finishes, flushing & filterability. Its clean, clear & odorless. It is mild to skin and has very low evaporation rate. Compatible with most available dielectric oils. The most recommended fluid for the high performance electrical discharge machines where close tolerances, optimum rates of metal removal, clean & efficient bums, excellent cooling & effective flushing are paramount. it safe to use on all types of filters used in sinking EDM machines. It is compatible with all ferrous metals, aluminum, copper, brass & bronze

GLOC-TRANSOKUT #2018
A transparent heavy duty multi-purpose cutting & machining oil. A severely hydro-treated mineral oil combined with a extreme pressure, anti-weld & lubricity additive package. A balance blend of active sulphur, chlorine & fatty materials. Excellent film strength & improved lubricity. It will perform well in a wide range of cutting & machining operations. A excellent universal cutting oil for all ferrous metals, from free machining metals up to difficult machining high alloy steel.
Performance Qualities
Versatile cutting oil for wide range of applications, high film strength, excellent EP & anti-weld properties, enhanced lubricity properties, superior wetting & cooling & lighter in color for better operator acceptance.

GLOC-SUPERKUT #253
A extreme heavy duty cutting oil designed to handle the toughest machining operations. It possesses a unique highly active additive package combining extreme pressure, anti-weld & lubricity. A well balanced blend of active sulphur, chlorine & fat containing additives in medium viscosity mineral oil. An additional recently developed extreme pressure & lubricity agent has been incorporated in its formulation to further enhance the all ready high performance level. For machining of difficult-to-machine alloy steels, especially for those with machinability ratings below 50%. Used for the most demanding machining as tapping, threading, broaching & hobbing. It will reduce friction & heat which will give greater dimensional accuracy, finer surface finishes & longer tool life. It contains active sulphur additives, therefore do not use on non- ferrous metals
Performance Qualities
New additive technology for improved overall performance, Formulated for the most difficult cutting operations, outstanding load-carrying capacity & wear protection, significant friction & heat reduction, improved surface finishes & dimensional accuracy & increased production rates & extended tool life.

RUST INHIBITORS

PRODUCT	ODOR	FILM	PROTECTION	CLEANING	APPLICATION
GLOC RUST RELEASE 1700	BLAND	OILY	INDOOR 12 MONTHS OUTDOOR 6 MONTHS	ALKALINE DEGREASE	SPRAY
GLOC RUST RELEASE 87	BLAND	HARD WAX	OUTDOOR 6-9 MONTHS	ALKALINE DEGREASE	DIP
GLOC RELEASE RP-7	BLAND	SOFT LIQUID	INDOOR 3 - 6 MONTHS	ALKALINE DEGREASE	DIP / SPRAY 15 % SOLUTION
GLOC RUST SOL # 2	BLAND	OILY	INDOOR 12 - 24 MONTH	ALKALINE DEGREASE	DIP / SPRAY 30 % SOLUTION

PRODUCT	COLOR	FLASH POINT	POUR POINT	SPECIFIC GRAVITY	PH 10 : 1 SOL	VISCOSITY Cst 40 C
RUST RELEASE 1700	BROWN	135 F	N/A	0.8922	N/A	170 - 200
RUST RELEASE 87	AMBER	135 F	< 0 F	O.8112	7 - 8	120 - 140
RP-7	AMBER	N/A	32 F	9.500	7 - 8	120 - 140
RUST SOL 2	AMBER	> 310 F	32 F	0.9181	8.5 - 9.5	90 - 110