1-800-352-9050      
        

 

 

 

GLOC-KUT 3089

Heavy Duty to Medium Semi-Synthetic Coolant

 

Description                                                                                                                            Product Data

GLOC-KUT 3089 is a medium to heavy-duty semi-synthetic micro emulsion cutting fluid with excellent hard water stability.  GLOC-KUT 3089 possesses excellent extreme pressure characteristics and superior wetting capability along with improved rust protection. GLOC-KUT 3089 contains no nitrites, phenols, chromates, or sulphur. GLOC-KUT 3089 has increased reserved alkalinity for superior rancidity control. GLOC-KUT 3089

Has superior lubricity and extreme pressure (EP), which allows for use on aluminum.

 

KEY PERFORMANCE QUALITIES

 

High performance general-purpose coolant

Excellent chip/fines settling properties                                                                                

Effective cooling with high lubricity  

Unique tool / wheel performance            extended tool life

Excellent rust protection

High degree of operator acceptance

Excellent foam control

Transparent (to see) in work place

Good Bio-stability and superior resistance to rancidity

 

TYPICAL APPLICATIONS

GLOC-KUT 3089 was developed for any type of grinding operation from ferrous to non-ferrous materials. GLOC-Kut 3089 is recommended for machining operations such as broaching, milling, turning, boring, drilling and other machining operations. GLOC-KUT 3089 is equally recommended for large central systems as well as for individual sumps. GLOC KUT 3089 may also be used for machining of most plastics and glass.

                                                

TYPICAL PROPERTIES:

 

Appearance Concentrate:

Clear Blue Liquid

Hard Water Solubility

Good

API Gravity, 60*F

9.0

Specific Gravity at 60°F

1.01

Density LBS/GAL

8.65

Flash Point, COC, F

None

PH @ 5 % Vol. In tap water

9.70

Odor

Characteristic

 

 

 

 

To obtain samples please contact our customer service representative.

 

 

 

CONCENTRATION CONTROL

 Please refer to the conversion chart

 

CONCENTRATION

 

3%

(1:33)

 

5%

(1:20)

 

6%

(1:15)

 

10%

(1:10)

REFRACTOMETER

READING

1.5

2.2

3.8

5.2

 

Refractometer concentration charts have been prepared in dilutions using de-ionized (DI) or distilled water.  Different types of water can have a significant effect on refractometer readings of coolant samples.  It may be necessary to prepare your own chart using plant water.

 

RECOMMENDED DILUTIONS

General machining: Ferrous Metals                                                             20:1            to            30:1

Tapping, threading & broaching                                                                   5:1            to            10:1

Aluminum & Stainless                                                                                10:1            to             20:1

Grinding Ferrous (Rockwell under 40)                                                       40:1            to             60:1

                             (Rockwell over 40)                                                      30:1             to            40:1

Blanchard: Segmented wheel grinding                                                        60:1            to            80:1

Light Stamping / Drawing                                                                         Neat             to             10:1    

Storage/Handling/Disposability

No health or safety hazards exists when GLOC-KUT 3089 metalworking fluids are stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

 

   back to Private Label