1-800-352-9050      
        

 

 

 

 

GLOC-7000 EP

Premium Extreme Pressure Bio-Stable Soluble Oil Cutting and Grinding Fluid Concentrate

Description                                                                                                                          Product Data

GLOC-7000 EP Heavy Duty extreme pressure coolant free from sulphur and phosphorous additives and has excellent hard water stability.  GLOC-7000 EP was develop with specialty additives and raw materials combined together to create one of our finest series of cutting and grinding fluids. GLOC-7000 EP  has a Bio-Stable additives and anti-oxidants combined with special lubricity agents and base oils to naturally resist biological degradation. GLOC-7000 EP is very effective on aerospace and automotive hard or soft grade aluminum and galvanic metals which leaves a shiny surface finish. GLOC 7000 EP is also a very universal product which enables it to easily cover a multitude of difficult machining and grinding of ferrous and non-ferrous metals.  

KEY PERFORMANCE QUALITIES

 

Original tried and proven formula

High performance all purpose coolant

Excellent chip/fines settling properties                                                                                

Unique tool / wheel performance            extended tool life      

Excellent rust protection

High degree of operator acceptance

Good Bio-stability and superior resistance to rancidity

 

TYPICAL APPLICATIONS

 GLOC-7000 EP was developed for any type of ferrous to non-ferrous metals such as stainless, nickel, vanadium, bronze, inconel, cast as well as nodular iron and tool steels such as FX, P20, M1, M2, H13 and C4130. The list is endless, including many other difficult to machine exotic type metals.GLOC-7000 EP is equally recommended for large central systems as well as for individual sumps.

                                         

TYPICAL PROPERTIES:

 

Appearance Concentrate:

Clear Blue Liquid

Hard Water Solubility

Good

API Gravity, 60*F

9.0

Specific Gravity at 60°F

1.01

Density LBS/GAL

8.65

Flash Point, COC, F

None

pH @ 5 % Vol. In tap water

9.4

Odor

Mild

 

 

 

 

To obtain samples please contact our customer service representative.

 

 

 CONCENTRATION CONTROL

 

Please refer to the conversion chart

 

CONCENTRATION

 

3%

(1:33)

 

5%

(1:20)

 

7%

(1:15)

 

10%

(1:10)

REFRACTOMETER

READING

2.8

4.8

6.8

9.8

 

Refractometer concentration charts have been prepared in dilutions using de-ionized (DI) or distilled water.  Different types of water can have a significant effect on refractometer readings of coolant samples.  It may be necessary to prepare your own chart using plant water.

 

RECOMMENDED DILUTIONS

General Machining:                                                                                20:1            to            40:1

Milling, Drilling & Turning:                                                                      10:1            to            20:1

Tapping, Threading, Reaming & Boring                                                  10:1            to            15:1

Aluminum & Stainless                                                                            10:1            to            20:1

Grinding – ID, OD & Center less                                                           20:1            to            30:1

Blanchard: Segmented wheel grinding                                                     25:1            to            30:1

Sawing                                                                                                  10:1            to             20:1    

Storage/Handling/Disposability

No health or safety hazards exists when GLOC-7000 EP metalworking fluids are stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.


  back to Private Label