1-800-352-9050      
        

 


 

GLOC KUT HD 71
A Moderate Duty Fluid Concentrated Coolant

 

Description                                                                                                                        Product Data

 GLOC-KUT HD 71  is an extreme pressure moderate duty, chlorinated, emulsifiable cutting fluid with excellent hard water stability.  GLOC-KUT HD 71 combines the lubricity of extreme pressure cutting oils with the superior cooling, wetting and anti-weld properties of heavy fortified soluble oils. GLOC-KUT HD 71 contains

a powerful bactericide, which extends the life of coolant in use.

 

KEY PERFORMANCE QUALITIES

 

 Excellent chip/fines settling properties                                                                                

 Extremely stable solution   

 Unique tool/wheel performance extended tool life

 Exceptionally Clean

 Operator Friendly

 Excellent foam control

 Superior rust control

 Emulsifiable in any concentration

 No nitrites or phenols

 

TYPICAL APPLICATIONS

GLOC-KUT HD 71 was developed for severe machining operations such as broaching, threading, tapping and hobbing of both ferrous and non-ferrous metals. GLOC-KUT HD 71 is equally recommended for large central systems as well as for individual sumps.                   

 

TYPICAL PROPERTIES:

 

Appearance Concentrate:

Light brown oil

Appearance of Solution

Milky white

Flash Point, COC, °F

330

Specific Gravity at 60°F

0.9703

Viscosity SUS at 100°F

600

Density LBS/GAL

8.08

%Total Chlorine, calculated

Present

Odor

Mild

PH @ 10% Vol. in tap water

9.5

Sodium Nitrate

None

Nitrite

None

Phenol

None

 

  CONCENTRATION CONTROL

 

Please refer to the conversion chart

 

CONCENTRATION

 

3%

(1:33)

 

5%

(1:20)

 

7%

(1:15)

 

10%

(1:10)

REFRACTOMETER

READING

1.1

5.0

7.0

10.0

 

Refractometer concentration charts have been prepared in dilutions using de-ionized (DI) or distilled water.  Different types of water can have a significant effect on refractometer readings of coolant samples.  It may be necessary to prepare your own chart using plant water.

 

RECOMMENDED DILUTIONS

General machining:                                                                               20:1            to            40:1

Tapping and threading                                                                          15:1            to            25:1

Broaching and other severe operations:                                                   5:1            to            15:1

Roll forming:                                                                                         20:1            to            30:1

 

Storage/Handling/Disposability

No health or safety hazards exists when GLOC-KUT HD 71 metalworking fluids are stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

    back to Private Label