1-800-352-9050      
        

 

 

 

LC-4010 Alkaline Cleaner

DESCRIPTION                                                                   Product Data

LC-4010 is a liquid alkaline cleaner for use in cleaning aluminum and copper. This product is designed
to be used in spray wash applications.

 

KEY PERFORMANCE BENEFITS

 

          Safe to use as directed on all metalworking aluminum and copper

          Phosphate and Nitrite Free

          Non-Corrosive

          Formulated to provide good in process rust protection for non-ferrous metals

 

TYPICAL APPLICATIONS

 

LC-4010 will effectively clean a surface of oil, grease and contaminants. This product should be used before introducing new lubricants. The dilution ratio will vary depending upon the amount of time a part is subject to the cleaner as well as the level of soil present on the part.

Common dilutions are 5% in water for a part introduced in cycles of 1 - 2 minutes. 110 to 140*F are recommended for best results

TYPICAL PHYSICAL AND CHEMICAL CHARACTERISTICS

Color

Appearance

Light Yellow

Clear, Liquid

Odor

Characteristic

Flash Point, COC, *F

NA *F

pH @ 3% dilution

Mineral Oil Content

Density 15*C, g/ml

8.00

0.00%

1.05

Viscosity @ 40*C

Cst NA

Corrosion Protection @ 3%

1

Chlorine Content

0.00%

   Flash Point                                                      N/A *F

   Foaming Tendencies                                       Normal

   Recommended Dilution                                  30:1 to 10:1

   Titration Factor                                               3.6

 

       Refractometer Reading

        30:1            20:1        10:1
       --------         ---------     --------
         1.0               2.0           2.8   

==================================================================

To obtain samples and pricing information please contact any of our professional customer service representatives at the number listed above.

==================================================================

The outstanding physical characteristics of this product coupled with the cost / performance function ratio justify looking at replacing your present cleaner.

 

Storage/Handling/Disposability

No health or safety hazards exists when LC-4010 metalworking fluid cleaners are stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

  back to Private Label