GLOC Private Label Products

GLOC-245-BXX Additive is an EP additive containing cutting oil formula for use in screw machines. This product is made from highly refined base stocks and contains anti-oxidants and anti-mist additives.

Part No. CF40   $0.00

A polyalphaolefin and hydrotreated naphthenic lubricant for applying to an air filter in small portions. Contains no nitrites, phenols, chromates, or phosphorous. GLOC FO-68 has stable additives and anti-oxidants.

Part No. CF-290   $0.00

GLOC-GRIND SYN CARB CLEAR is a biodegradable concentrate fluid with exceptional hard water stability and low foam characteristics. GLOC-GRIND SYN CARB CLEAR rejects oil based materials, which improves machine cleanliness and coolant sump life. GLOC-GRIND SYN CARB CLEAR contains no nitrites, phenols, chromates, active sulphur or phosphorous. GLOC-GRIND SYN CARB CLEAR has a buffered pH which provides excellent stability over wide dilution ratios resulting in higher operator acceptance. GLOC-GRIND SYN CARB CLEAR can be used on aluminum, carbon steel, stainless steel and other alloys. GLOC-GRIND SYN CARB CLEAR is inhibited to resist cobalt leaching when using carbide-grinding wheels.

Part No. CF-5050   $0.00

A light colored cutting oil utilizing the latest chlorine free technology. Contains active sulfur and is designed for use on ferrous applications calling for extreme pressure cutting oils. Also contains a mist inhibitor to minimize oil mist and smoke. Designed for use in moderate to severe machining operations.

Part No. CF-340   $0.00

A light colored cutting oil utilizing the latest chlorine free technology. This product contains active sulfur and is designed for use on ferrous applications calling for an extreme pressure cutting oil. Contains a mist inhibitor to minimize oil mist and smoke. Designed for use in moderate to severe machining operations. Available in different EP levels and viscosity grades to cover a wide variety of machining operations and metals.

Part No. CF-100   $0.00

GLOC HD R&O 100 represents a new chemistry in the selection of commercially available circulating and hydraulic oils. This is premium grade rust and oxidation inhibited oil. It is a light colored and low odor oil. GLOC HD R&O 100 is based on select high quality base stocks and is formulated to meet the specifications of major hydraulic pump manufacturers and equipment builders. GLOC HD R&O 100 has excellent low temperature properties and is a good choice for applications requiring low temperature characteristics with good oxidation stability.

Part No.   $0.00

GLOC-MAGNUM 354A is a water based cleaner and degreaser formulated to remove grease, oil, carbon, or any other industrial soil from concrete, machinery, engines, floors, walls and etc. Low foaming for use in automatic scrubbers. Extremely concentrated for dilutions of up to 1 ounce per gallon of water, non-toxic, non-flammable and biodegradable, for safe use on all surfaces not harmed by water. Cleans faster, easier, and more economically than any product on the market today.

Part No.   $398.20

GLOC-MAGNUM 354A is a water based cleaner and degreaser formulated to remove grease, oil, carbon, or any other industrial soil from concrete, machinery, engines, floors, walls and etc. Low foaming for use in automatic scrubbers. Extremely concentrated for dilutions of up to 1 ounce per gallon of water, non-toxic, non-flammable and biodegradable, for safe use on all surfaces not harmed by water. Cleans faster, easier, and more economically than any product on the market today.

Part No.   $398.20

LC-4010 is a liquid alkaline cleaner for use in cleaning aluminum and copper. This product is designed to be used in spray wash applications.

Part No. CF-990   $0.00

GLOC CSC is a hydrocarbon liquid alkaline cleaner and will effectively clean a surface of oil, grease and contaminants.

Part No. CF-980   $0.00

GLOC CLEAN SC #19 is a liquid alkaline sump cleaner for coolant clean-outs and general maintenance cleaning.

Part No. CF-970   $0.00

GLOC SOLV PLUS is a solvent machine and parts cleaner to be used as received. This product is safe for use on all metals. GLOC SOLV PLUS is formulated from high purity ingredients to promote superior cleaning and operator acceptance.

Part No. CF9810   $0.00

GLOC-9010 is a water soluble coolant conditioner and broad-spectrum coolant additive to stabilize the coolant system. GLOC-9010 can be added sump side to a pre-diluted coolant, 1quart per 100 gallons of diluted coolant. GLOC-9010 once added to the system should be allowed to re-circulate, and than normal machining operations can begin. The outstanding physical characteristics of this product coupled with the cost / performance function justifies looking at utilizing GLOC-9010 to prolong the life of your machining coolant.

Part No. CF-715   $0.00

Contains active sulfur and is designed for use on ferrous applications calling for an extreme pressure cutting oil. Transokut 2018 is a transparent heavy-duty multi-purpose cutting and machining oil. Formulated from severely hydro-treated mineral oil combined with an extreme pressure anti-weld and lubricity additive package. This well-balanced blend of active sulfur, chlorine and fatty materials provides EP and anti-weld characteristics along with very high film strength and improved lubricity. This versatile fluid is designed to perform satifactorily in a wide range of cutting and machining operations.

Part No. CF-200   $0.00

Contains active sulfur and is designed for use on ferrous and non-ferrous alloys applications calling for an extreme pressure cutting oil. A unique, lightly colored transparent extreme pressure cutting and maching oil. Formulated from severely hydro treated base stock compounded with unusally light colored active sulfur, chlorine and lubricity containing additives.This well balanced blend of activesulfur, chlorine and fatty materials provides maximum EP and anti-weld characteristics, along with very high film strength and outstanding lubricity. This versatile fluid is designed to perform satisfactorily in a wide range of cutting and machining operations.

Part No. CF-300   $0.00

For applications that require the use of heavy duty cutting oils with extreme pressure additives. Works on stainless steel, titanium, and extremely difficult metals and alloys.

Part No. CF-3200   $0.00

A light colored base oil formulated from select stocks to provide excellent oxidation stability. Low viscosity inactive cutting oil designed especially for aluminum and magnesium. Anti-mist additive is also incorporated to reduce airborne fog and mist in high speed applications.

Part No. CF-165   $0.00

A light colored, active sulfur cutting oil utilizing the latest technology. Designed for use on ferrous applications calling for an extreme pressure cutting oil. Contains a mist inhibitor to minimize oil mist and smoke. For use in moderate to severe machining operations. Available in different EP levels and viscosity grades to cover a wide variety of machining operations and metals.

Part No. CF-610   $0.00

Contains active sulfur and is designed for use on ferrous and non-ferrous alloy applications calling for an extreme pressure cutting oil. A heavy-duty, multi-purpose cutting and machining oil formulated from severely hydro treated mineral oil combined with an extreme pressure, anti-weld and lubricity additive package. Contains a unique detergent additive to aid in the removal of this product in aqueous cleaning systems. This well balanced blend of active sulfur EP additives is designed to prolong tool life, as well as minimize misting with anti-mist additives. Sulkut D also has an anti-weld charactersitic along with very high film strength to improve lubricity. This versatile fluid is designed to perform satisfactorilly in a wide range of cutting, drawing, and machining operations. Should not be used on copper and copper alloys.

Part No. CF-6505   $0.00

A light colored, low odor multi-purpose oil with extreme pressure additives that are effective in reducing friction at the chip tool interface. This allows for peak performance in ferrous and non-ferrous metal applications. Can be used in grinding, screw machines, and general purpose machining and is compatible in hydraulic systems. Rust and oxidation inhibition properties help keep hydraulic systems clean and free of sludge deposits. As a cutting oil it provides a good surface finish on the work piece and long tool life. An anti-mist additive minimizes misting and an anti-weld characterisitc along with very high film strength improves lubricity.

Part No. CF-950   $0.00

GLOC Super Kut 630 contains active sulfur and is designed for use on ferrous applications calling for extreme pressure (EP) cutting oil. GLOC Super Kut 630 is a heave duty, multi-purpose cutting and machining oil. GLOC Super Kut 630 is formulated from severely hydro treated mineral oil combined with an extreme pressure, anti-weld and lubricity additive package. This well balanced blend of active sulfur, chlorine and fatty materials provides EP and anti-weld characteristics along with very high film strength and improved lubricity. This versatile fluid is designed to perform satisfactorily in a wide range of cutting and machining operations.

Part No.   $0.00

GLOC TRI-PURPOSE C is a light colored and low odor multi-purpose oil. GLOC TRI-PURPOSE C extreme pressure additives are effective in reducing friction at the chip tool interface. This allows for peak performance in ferrous and non-ferrous metal applications. GLOC TRI-PURPOSE C has found applications in grinding, screw machines, and general purpose machining and compatible in hydraulics systems. GLOC TRI-PURPOSE C rust and oxidation inhibition properties help keep hydraulic systems clean and free of sludge deposits. As a cutting, oil GLOC TRI-PURPOSE C provides a good surface finish on the work piece and long tool life as well as anti-mist to minimize misting plus a anti-weld characteristic along with very high film strength to improved lubricity.

Part No. CF940   $0.00

A premium quality, high viscosity oil forbearings and gears operating at low speeds. Cylinder Oil 460 is a low volatility oil containing fatty compounds.

Part No. CF-3450   $0.00

A synthetic hydrocarbon based electrical discharge machine fluid. This product exhibits excellent thermal and oxidation stability, which results in long fluid life.

Part No. CF-2850   $0.00

An electrical discharge machining fluid to be used as received. This oustanding product exhibits excellent resistance and is easily filtered. Particles settle out due to the low viscosity of this product. With it’s relatively high flash point and non-corrosive traits, this product is operator accepted.

Part No. CF-2700   $0.00

A high quality electrical discharge machining oil to be used as received. It is a premium dielectric discharge fluid meeting the requirements for insulation and controlled dielectric discharge during machining operations. It exhibits excellent resistance to oxidation and is easily filtered. Particles quickly settle out due to low viscosity of the product. With its relatively high flash point ans non-corrosive traits, this product is operator accepted.

Part No. CF-2725   $0.00

A fully synthetic, transparent fluorescent green dielectric fluid for electrical discharge machines.This product exhibits excellent thermal and oxidation stability, which results in longer fluid life. This chemical formulation virtually eliminates skin irritations during use. Good for all ferrous metals, aluminum, brass, bronze and copper.

Part No. CF-2710   $0.00

A water soluble corrosion inhibitor for use in electrical discharge machines. Exhibits excellent corrosion resistance and aids in particle filtration. Used dilution is 8 parts water to 1 part EDM RP8. A heavy concentrate with high quality additives that provide excellent corrosion protection, preventing the build up of rust on work piece and non-stainless holders.

Part No. CF-507   $0.00

A high quality, water soluble corrosion inhibitor for use in electrical discharge machine fluids that use water. Inhibits corrosion and aids in particle filtration. Use dilution up to 300:1 (parts water to EDM RP). A heavy concentrate with high quality additives that provide excellent corrosion protection, preventing the build up of rust on work pieces and non-stainless holders.

Part No. CF-505   $0.00

A water soluble, non-silicone foam inhibitor. Formulated to be used sump side at a rate of 4 ounces per 100 gallons of diluted coolant. It is effective in high pressure system by increasing the rate of foam break.

Part No. CF-725   $0.00

A versatile premium quality extreme pressure oil designed to lubricate industrial gear units. Manufactured using a proven sulfur-phosphorous additive system and is free of lead or lead compounds.

Part No. CF-3595   $0.00

A premium grade gear oil designed to protect internal gears from wear. To be used as received. Formulated for maximum thermal stability and form resistance. Carefully balanced anti-wear chemistry helps extend gear life. It contains rust and oxidation inhibitor properties to help keep systems clean.

Part No. CF-3550   $0.00

A premium grade gear oil designed to protect internal gears from wear. To be used as received and formulated for maximum thermal stability and form resistance. Carefully balanced anti-wear chemistry helps extend gear life. It contains rust and oxidation inhibitor properties to help keep systems clean.

Part No. CF-3525   $0.00

A premium grade gear oil designed to protect internal gears from wear. To be used as received. Formulated for maximum thermal stability and form resistance. Carefully balanced anti-wear chemistry helps extend gear life. It contains rust and oxidation inhibitor properties to help keep systems clean.

Part No. CF-3500   $0.00

GLOC HTO-56V is a specially selected thermal stable mineral oil containing an appropriate anti-oxidant designed for heat transfer applications. GLOC HTO-56V thermal stability of heat transfer oil is a prime consideration. Nearly as important is the oxidation of the oil. While most hot oil units are designed to limit (or eliminate) contact of the circulating hot oil with air, some contact is inevitable at startup in the expansion tank during storage and from air leaks. The ability of GLOC HTO-56V to resist oxidation degradation has been demonstrated in tests simulating service conditions and confirmed by excellent performance in commercial applications.

Part No. CF-6900   $0.00

A premium grade petroleum, amber colored honing oil containing extreme pressure additives.

Part No. CF-6700   $0.00

A light colored, low odor premium hydraulic oil containing anti-wear additives. This oil can be used in a variety of hydraulic pumps. Contains additives to prevent the chemical etching on the interior of the hydraulic pumps.

Part No. CF-2400   $391.05

A light colored, low odor premium grade hydraulic oil formulated to meet the specifications of major hydraulic pump manufacturers and equipment builders.

Part No. CF-2300   $391.05

A light colored, low odor premium grade hydraulic oil blended to meet the specifications of major hydraulic pump manufacturers and equipment builders.

Part No. CF-2100   $391.05

A light colored, low odor premium grade hydraulic oil blended to meet the specifications of major hydraulic pumpmanufacturers and equipment builders.

Part No. CF-2200   $391.05

GLOC R&O TURBO 46 a new chemistry in the selection of commercially available hydraulic oils. It is light colored and low odor oil. GLOC R&O TURBO 46 is premium grade hydraulic oil blended to meet the specifications of major hydraulic pump manufacturers and equipment builders. Formulated with GROUP ll base stocks.

Part No. CF-2450   $0.00

GLOC HYDRAULIC 15B SNOWPLOW OIL is a premium grade hydraulic oil formulated with Group ll base stocks for excellent thermal and oxidation stability. GLOC HYDRAULIC 15B SNOWPLOW OIL meets the specifications of major hydraulic pump manufacturers and equipment builders.

Part No. CF-2075   $0.00

GLOC-MINERAL SEAL OIL is highly refined paraffinic light oil that is odorless and water-white in appearance. Specifications and typical physical properties are listed below.

Part No. CF-2020   $0.00

GLOC QUENCH A is formulated from high quality paraffin base stocks which will resist oxidation. GLOC QUENCH A is oxidation inhibited to provide long bath life in conventional operations. The outstanding physical characteristics of this product coupled with the cost performance function ratio justify looking at replacing present quenching oil. GLOC QUENCH A is recommended for conventional quenching of ferrous metals at bath temperatures up to 150*F

Part No. CF-010   $0.00

A marquench oil formulated from high quality paraffinic base stocks and a highly refined petroleum residium. It is oxidation inhibited to provide long bath life at higher bath temperatures.

Part No. CF-1125   $0.00

A marquench oil formulated from high quality paraffinic basestocks and highly refined petroleum residium. It is oxidation inhibited to provide long bath life at higher bath temperatures.

Part No. CF-1150   $0.00

An additive and oxidation inhibited quench oil formulated from high quality paraffin basestocks and a highly refined petroleum. It is oxidation inhibited to provide long bath life in conventional operations requiring a fast quench speed.

Part No. CF-005   $0.00

Formulated from high quality base stocks which will resist oxidation in high speed operations. It is oxidation inhibited to provide long bath life in conventional operations.

Part No. CF-1115   $0.00

GLOC QUENCH 65 is an additive and oxidation inhibited quench oil formulated from high quality paraffin base stocks which will resist oxidation in high speed operations. GLOC QUENCH 65 is oxidation inhibited to provide long service life in conventional operations requiring a fast quench speed. GLOC QUENCH 65 retains its original viscosity indefinitely in normal service and requires no additive additions.

Part No. CF-1105   $0.00

Mineral type roll oils used primarily to lubricate and cool the rolls and strip in the cold rolling of ferrous and nonferrous metals. These roll oils or roll coolants are specifically compounded to meet a variety of conditions. The applications required in the cold rolling of stainless steel, copper, brass, titanium and aluminum. It’s fortified with an effective ashless anti-wear additive, providing increased bearing life on Sendzimir and other milling applications where rolling oil is used as a mill roll bearing lubricant.

Part No. CF-1825   $0.00

GLOC-Rolling Mill Oil Q is a mixture of vegetable based lubricants for use in mist and rolling mill applications. Used primarily to lubricate and cool the rolls and strip in the cold rolling of ferrous and nonferrous metals. These rolling oils are specially compounded to meet a variety of conditions. They are particularly suitable for use in sawing and aluminum tapping applications and the applications required in the cold rolling of stainless steel, copper, brass, titanium and aluminum.

Part No. CF-1850   $0.00

Represents a new chemistry in the selection of commercially available water soluble rust preventative products. With its relatively neutral pH, this product will not contribute to high pH formulations which can cause operator irritations. An exceptional product which exhibits low foam characteristics nd had hard water solubility.

Part No. CF-545   $0.00

A water-soluble rust preventative. Based on carboxylic acid salt corrosion inhibitors and formulated foruse on ferrous applications where post corrosion protection is required. Contains metal passivator to inhibit dissimilar metal corrosion.

Part No. CF-535   $0.00

A high quality, water based corrosion inhibitor. May be diluted with water and will prevent corrosion of ferrous metals at concentrations as low as 0.25%.

Part No. CF-500   $0.00

A solvent cut-back rust preventative designed for temporary rust protection primarily in industrial applications. It has been developed and formulated as an effective water displacing, non-staining, rust preventative for temporary indoor protection of metals. Leaves a slightly oily film that is almost invisible. Its metal wetting polar activity not only displaces water from metal surfaces but helps to prevent the redisposition of free water.

Part No. CF-520   $624.80

An oil based corrosion inhibitor for use on ferrous and non-ferrous parts. This product has a high flash point and is designed to give a minimum of 24 months indoor protection in industrial applications. It has been developed and formulated as an effective water displacing, non-staining, rust preventative for indoor protection of metals. Leaves a slightly oily film that is almost invisible. Its metal wetting polar activity not only displaces water from metal surfaces, but helps to prevent the redisposition of free water.

Part No. CF-560   $0.00

GLOC-WBRP #2 is a water extendable corrosion inhibitor, intended for use on ferrous parts which are stored indoors for industrial applications. It has been developed and formulated as an effective water displacing, non-staining, rust preventative for long-term indoor protection of metals (two years plus) which may be achieved by using WBRP #2 at dilutions of 30% or greater. GLOC-WBRP #2 corrosion protection may be controlled by dilution concentrations in water. Its metal wetting polar activity not only displaces water from metal surfaces but helps to prevent the redisposition of free water.

Part No. CF-517   $0.00

A heavy duty semi-synthetic high pressure micro-emulsion concentrate with excellent hard water stability. Developed to reduce foam in high presure systems. Contains no nitrites, phenols, chromates, active sulfur or phosphorous. It has bio-stable additives and anti-oxidants combined with special lubricity agents and base oils to naturally resist biological degradation. Kut EPX has superior lubricity and extreme pressure, which can be used on aluminum.

Part No. CF-1525   $878.65

A medium to heavy duty semi-synthetic micro emulsion cutting fluid with excellent hard water stability. Possesses excellent extreme pressure characteristics and superior wetting capability along with improved rust protection. Contains no nitrites, phenols, chromates, or sulfur. Has increases reserved alkalinity for superior rancidity control. Can be used on aluminum because of its superior lubricity and extreme pressuce characteristics.

Part No. CF-800   $0.00

GLOC-HD 669 HO-l is a multipurpose semi-synthetic micro emulsion concentrate machining and grinding fluid with excellent hard water stability. GLOC-HD 669 HO-1 has superior cooling and wetting properties that result in longer tool and wheel life and can be used on a variety of ferrous and non-ferrous metals. GLOC-HD 669 HO-1 was developed with special additives and raw materials combined together to create our finest series of cutting and grinding fluids. GLOC-HD 669 HO-1 can be used on all general metalworking applications and used on extremely difficult machining such as broaching, hobbing, tapping and gun drilling. GLOC-HD 669 HO-l contains no nitrites, phenols, chromates, active sulphur or phosphorous. GLOC-HD 669 HO-1 has Bio-Stable additives and anti-oxidants combined with special lubricity agents and base oils to naturally resist biological degradation. GLOC-HD 669 HO-1 has superior lubricity and extreme pressure (EP), which can be used on aluminum.

Part No. CF-1500   $0.00

GLOC-HD 669 HO-1cl is a multipurpose semi-synthetic micro emulsion concentrate machining and grinding fluid with excellent hard water stability. GLOC-HD 669 HO-1cl has superior cooling and wetting properties that result in longer tool and wheel life and can be used on a variety of ferrous and non-ferrous metals. GLOC-HD 669 HO-1cl was developed with special additives and raw materials combined together to create our finest series of cutting and grinding fluids. GLOC-HD 669 HO-1cl can be used on all general metalworking applications and used on extremely difficult machining such as broaching, hobbing, tapping and gun drilling. GLOC-HD 669 HO-1cl contains no nitrites, phenols, chromates, active sulphur or phosphorous. GLOC-HD 669 HO-1cl has Bio-Stable additives and anti-oxidants combined with special lubricity agents and base oils to naturally resist biological degradation. GLOC-HD 669 HO-1cl has superior lubricity and extreme pressure (EP), which can be used on aluminum.

Part No. CF-1570   $0.00

A high quality semi-synthetic mirco-emulsion cuting fluid for use with both ferrous and non-ferrous metals. A bio-stable machining coolant manufactured from premium virgin vegetable oils and fortified with with aspecial additive package. Contains no petroleum oil and has lubricity and extreme pressure additives which allows for use on aluminum.

Part No. CF-2525   $0.00

Sol-Grind is a premium grade soluble oil containing chlorinated extreme pressure additives and polar lubricity agents. This lubricant can be used on a variety of machining operations and light to moderate drawing and stamping. Hard water salts, bacteria and fungus are inhibited. It is a heavy duty biodegradable fluid with low foam characteristics. It has superior cooling and wetting properties that results in longer tool and sump life.

Part No. CF-1425   $0.00

A high quality, soluble coolant with exceptional hard water stability and low foam characteristics. It improves machine cleanliness and coolant sump life. Has extreme pressure additives which provides excellent stability over wide dilution ratios. It can be used on a variety of machining operations as a coolant. Formulated to inhibit corrosion when diluted to 20:1 or lower. Can be used on aluminum, carbon steel, stainless steel and other alloys.

Part No. CF-1225   $0.00

A heavy duty, premium soluble oil containing chlorinated extreme pressure additives nd polar lubricity agents, with excellent hard water stability. Contains no nitrites, phenols, chromates, active sulfur or phosphorous. Can be used on a wide variety of machining operations and light ro maderate drawing and stamping. Hard water salts, bacteria and fungus are inhibited. Formulated for use on ferrous and aluminum alloys.

Part No. CF-1300   $0.00

A high quality soluble cutting fluid for use both on ferrous and non-ferrous metals. Manufactured from premiumvirgin mineral oils and fortified with a special additive package for superior long term trouble free performance and exceptional tool life.

Part No. CF-1700   $0.00

An extreme pressure, moderate duty, chlorinated, emulsifiable cutting fluid with excellent hard water stability. Combines the lubricity of extreme pressure cutting oils with the superior cooling, wetting and anti-weld properties of heavy fortified soluble oils. Contains a powerful bactericide which extends the life of coolant in use.

Part No. CF-700   $0.00

GLOC-7000 EPX is a heavy duty extreme pressure coolant free from sulfur and phosphorous additives, and has excellent hard water stability. GLOC-7000 EPX was developed with specialty additives and raw materials combined together to create one of our finest series of cutting and grinding fluids. GLOC-7000 EPX has Bio-Stable additives and anti-oxidants combined with special lubricity agents and base oils to naturally resist biological degradation. GLOC-7000 EPX is very effective on aerospace and automotive hard or soft grade aluminum and galvanic metals, which leaves a shiny surface finish. GLOC-7000 EPX is also a very universal product which enables it to easily cover a multitude of difficult machining and grinding of ferrous and non-ferrous metals.

Part No. CF-1025   $0.00

GLOC-GW-3100 is a heavy duty extreme pressure coolant free from sulfur and phosphorous additives, and has excellent hard water stability. GLOC-GW-3100 was developed with specialty additives and raw materials combined together to create one of our finest series of cutting and grinding fluids. GLOC-GW-3100 has additives and anti-oxidants combined with special lubricity agents and base oils to naturally resist biological degradation. GLOC-GW-3100 is very effective on aerospace and automotive hard or soft grade aluminum and galvanic metals, which leaves a shiny surface finish. GLOC-GW-3100 is also a very universal product which enables it to easily cover a multitude of machining and grinding of ferrous and non-ferrous metals.

Part No. CF-1020   $0.00

A water extendable special purpose machining, drawing, fine blanking, and stamping coolant based on food grade canola oil. This product is petroleum oil free and may be used on both ferrous and non-ferrous machining operations. Provides excellent lubricity, which results in excellent surface finish and tool life when machining aluminum alloys. Fungus and bacteria are inhibited to provide long sump life. A thin, tack-free product residue provides rust protection to both machine and parts. Typical use dilutions are 5% to 15% in water.

Part No. CF-4020   $0.00

A premium quality, highly refined lubricating oil formulated for use in high speed lightly loaded bearings. Light colored and low odor oil which provides excellent oxidation stability, rust protection and resistance to deposit formation. Its low viscosity reduces oil thickness, lowering operating temperatures by reducing friction and increasing machine efficiency. Carefully balanced anti-wear chemistry helps extend equipment life. Contains rust and oxidation inhibitor properties to help keep systems clean and free of sludge deposits.

Part No. CF-4510   $0.00

A premium quality, highly refined paraffinicoil formulated for use in high speed lightly loaded bearings. Light colored and low odor oil that provides excellent oxidation stability, rust protection and resistance to deposit formation. Its low viscosity reduces oil thickness, lowering operating temperatures by reducing friction and increasing machine efficiency. Contains rust and oxidation inhibitor properties to help keep systems clean and free of sludge deposits.

Part No. CF-4500   $0.00

A premium quality, highly refined lubricating oil formulated for use in high speed, lightly loaded bearings. Light colored and low odor oil that provides excellent oxidation stability, rust protection, and resistance to deposit formation. Formulated with low viscosity to reduce oil thickness. Lowers operating temperatures by reducing friction and increasing machine efficiency. Carefully balanced anti-wear chemistry helps extend equipment life.Contains rust and oxidation inhibitor properties to help keep systems clean and free of sludge deposits.

Part No. CF-4090   $0.00

A highly refined paraffin distillate which will resist oxidation in high speed operations. The low viscosity reduces oil thickness, lowering operating temperatures by reducing friction and increasing machine efficiency. Provides excellet stability, rust protection and resistance to deposit formation.

Part No. CF-4080   $0.00

A chlorine fortified EP drawing and stamping lubricant. The extreme pressure additives are effective in prolonging die life. This product can be used on cold steel, stainless steel or other alloys. Possesses the highest level of EP and antiweld properties.

Part No. CF-1060   $0.00

Petroleum based, water soluble drawing and stamping fluid. This product contains chlorinated extreme pressure additives to provide excellent anti-weld and die protection properties.

Part No. CF-110   $0.00

GLOC-SYNTHETIC STAMPING & DRAWING LUBRICANT represents a new line of commercial available stamping, drawing, machining & grinding coolants. It has superior cooling and wetting properties those results in longer tool life. This product is a low viscosity, synthetic, heavy duty forming lubricant with long sump life and is very efficient at rejecting tramp oil. The outstanding physical characteristics of this product coupled with the cost performance function ratio justify looking at replacing your present drawing and stamping fluid.

Part No.   $0.00

A cholrine-free evaporative lighty-duty drawing lubricant designed for use on ferrous applications. An exceptional product containing EP and lubricity additives to protect tooling and leaves minimal residue upon drying. Available in different EP levels and viscosity grades to cover a wide variety of machining operations and metals.

Part No. CF-6000   $0.00

A light colored, low odor drawing oil with extreme pressure additives that are effective in reducing friction at the die metal interface. This allows for peak performance in ferrous and non-ferrous metal applications. It can be used in stamping operations to keep the tools cool and prevent wear. Safe to use on all types of metals. Can be applied by spraying, dipping, brushing and roller coating methods.

Part No. CF-6400   $0.00

A light colored, low odor drawing oil with extreme pressure additives that are effective in reducing friction at the die metal interface. This allows for peak performance in ferrous and non-ferrous metal applications. It can be used in stamping operations to keep the tools cool and prevent wear. Safe to use on all types of metals. Can be applied by spraying, dipping, brushing and roller coating methods.

Part No. CF-6410   $0.00

A light colored, low odor drawing oil with extreme pressure additives that are effective in reducing friction at the die metal interface. This allows for peak performance in ferrous and non-ferrous metal applications. It can be used in stamping operations to keep the tools cool and prevent wear. Safe to use on all types of metals. Can be applied by spraying, dipping, brushing and roller coating methods.

Part No. CF-6430   $0.00

An evaporative forming lubricant that may be used on copper, steel and aluminum. This product is particularly designed for fin stamping and end sheet production in shops that do not clean their coils. It is compatible with most painting and brazing operations as well as most refrigerants.

Part No. CF-6450   $0.00

GLOC FL-80AX represents a new chemistry in the selection of commercially available fin stamping lubricants. An anti-mist additive is also incorporated to reduce airborne fog and smoke applications. The additive system is an ashless system which burns clean in brazing operations. The additive can be painted even if coil is not cleaned.

Part No. CF-000   $0.00

A biodegradble concentrate fluid with exceptional hard water stability and low foam characterisitcs. Rejects oil based materials, improving machine cleanliness and coolant sump life. Contains no nitrites, phenols, chromates, active sulfur or phosphorous. Has a buffered pH which provides excellent stability over wide dilution ratios resulting in higher operator acceptance. Can be used on aluminum, carbon steel, stainless steel, and other alloys. Inhibited to resist cobalt leaching when using carbide-grinding wheels.

Part No. CF-5055   $0.00

A high quality, biodegradable fluid with exceptional hard water stability and low foam chaacteristics. Rejects oil based materials, which improves machine cleanliness and coolant sump life. Has a buffered pH, which provides excellent stability over wide dilution ratios resulting in high operator acceptance. Inhibited to resist cobalt leaching when using carbide-grinding wheels. Formulated to inhibit corrosion when diluted to 40:1. Can be used on aluminum, carbon steel, stainless steel and other alloys.

Part No. CF-5000   $0.00

A high quality, biodegradable fluid with exceptional hard water stability and low foam characteristics. It rejects all oil based materials, which improves machine cleanliness and coolant sump life. Has a buffered pH, which provides excellent stability over wide dilution ratios resulting in high operator acceptance. Inhibited to resist cobalt leaching when using carbide grinding and is formulated to inhibit corrosion when diluted to 40:1.

Part No. CF-5025   $0.00

A heavy duty biodegradable fluid with exceptional hard water stability and low foam characterisitcs. it has superior cooling and wetting properties that result in longer tool life. This product has long sump life and is efficient at rejecting tramp oil. It has a buffered pH, which provides excellent stability over wide ratios resulting in high operator acceptance.

Part No. CF-1400   $0.00

A heavy duty cutting fluid with excellent hard water stability. Combines the lubricity of extreme pressure cutting oils with the superior cooling, wetting and anti-weld properties of heavy fortified soluble oils. Contains no mineral oils, nitrites, phenols, chromates, chlorine or sulfur. Formulated with a unique compound to provide maximum lubricity for all machining and grinding operations. Has superior lubricity and extreme pressure characteristics that allow for use on aluminum.

Part No. CF-900   $0.00

A heavy duty cutting and grinding fluid with excellent hard water stability. It combines the lubricity of extreme pressure cutting oils with the superior cooling, wetting properties and ant weld properties of heavy fortified soluble oils. Contains no mineral oils, nitrites, phenols, chromates, chlorine or sulfur. GLOC SYN-COOL PLUS contains a unique compound to provide maximum lubricity for all machining and grinding operations. Has superior lubricity and extreme pressure (EP), which allows for use on aluminum.

Part No. CF-910   $0.00

Has superior cooling and wetting properties that results in longer tool life. Cool 930 has a long sump life and is very efficient at rejecting tramp oil.

Part No. CF-930   $0.00

TL-88EXX Tube Lubricant is compatible with R-134-A and R-12 refrigerants. It is completely ashless upon heating and will not interfere with braze joint integrity.

Part No. CF-6500   $0.00

GLOC TL-699 SYN Tube Lube is a water based synthetic lubricant designed for stainless and other tube expanding. GLOC TL-699 SYN Tube Lube this product has no flash point and may be easily removed with plain water.

Part No. CF-6475   $0.00

A light colored, vegetable based cutting oil. Formulated from food grade canola oil and vegetable esters. Anti-mist additive is also incorporated to reduce airborne fog and mist in high speed applications. This product exceeds the requirements for the U.S. FDA for H1 lubricants for incidental food contact for use in food plants for the possibility of incidental contact with food for human consumption.

Part No. CF-370   $0.00

GLOC Canola-Kut VC-185S is a light colored EP-fortified vegetable based cutting oil. This product is formulated from soybean oil and contains sulfur extreme pressure additives. An anti-mist and antioxidant system is incorporated to reduce airborne fog and mist and provide long trouble free sump life.

Part No. CF-375   $0.00

A premium quality, highly refined lubricating oil formulated and designed to provide optimum slip/stick characteristics to machine ways. Light colored and low odor oil. It represents a new chemistry in the selection of commercially available way oils. Carefully balanced anti-wear chemistry helps extend equipment life. Contains rust and oxidation inhibitor properties to help keep systems clean and free of sludge deposits.

Part No. CF-2900   $409.20

A premium metallic, sulfur containing slide way lubricant. A highly refined lubricating oil formulated and designed to provide optimum slip/stick characteristics to machine ways. It represents a new chemistry in the selection of commercially available way oils. To be used as received for use on all types of machine tools requiring a tacky, non-corrosive EP fortified product. Carefully balanced anti-wear chemistry helps extend equipment life. Contains rust and oxidation inhibitor properties to help keep systems clean and free of sludge deposits. Formulated to meet Cincinnati Milacron Specification P-50 heavy way lubricant.

Part No. CF-4000   $409.20

A premium metallic, sulfur containing slide way lubricant. A highly refined lubricating oil formulated and designed to provide optimum slip/stick characteristics to machine ways. It represents a new chemistry in the selectionof commercially available way oils. To be used as received for use on all types of machine toolsrequiring a tacky, non-corrosive EP fortified product. Carefully balanced anti-wear chemistry helps extend equipment life. Contains rust and oxidation inhibitor properties to help keep systems clean and free of sludge deposits. Formulated to meet Cincinnati Milacron Specification P-47 heavy medium way lubricant.

Part No. CF-3000   $409.20