Shell

Shell Corena AP is an advanced reciprocating air compressor lubricant and is based on specially selected synthetic ester fluids. It incorporates the latest additive technology to provide outstanding performance.

Part No.   $0.00

Shell Corena AS is an advanced air compressor lubricant using specialized additive technology, capable of giving outstanding performance in oil-flooded air compressors of screw or vane design. Based on specially selected PAO base fluids, Corena AS provides long oil life and effective lubrication in severe applications.

Part No.   $0.00

Shell Corena S is a premium quality lubricant developed for the lubrication of rotary sliding vane and screw air compressors. It is based on a blend of selected solvent refined base oils and carefully chosen additives.

Part No.   $0.00

Shell Diesel Ready Fully Formulated Coolant/Antifreeze is a conventional, single-phase, ethylene glycol based heavy-duty diesel engine coolant with silicate, nitrite and molybdate. Shell Diesel Ready already contains the initial dose of supplemental coolant additives (SCAs) and is ready for use in initial fill, flush and fill, and top-up applications. Shell Diesel Ready is compatible with commercially available SCAs and meets TMC RP 329 and ASTM D6210. Use of a Shell Diesel Ready, a fully formulated coolant as top-up may help reduce the number of SCA treatments required over the coolants life. Commercially available test strips can be used with this product to determine when additional SCAs must be added. Always refer to your vehicles owners manual for exact coolant requirements.

Part No.   $0.00

Shell Rotella® ELC Extended Life Coolant/Anti-Freeze is a “fill for life” ethylene glycol based coolant for heavy-duty diesel, gasoline and natural gas powered engines. Shell Rotella® ELC contains a unique extended life carboxylate inhibitor system and nitrite / molybdate as secondary Shell Rotella® ELC meets all the requirements of CAT EC-1, TMC RP 329 and RP 338. Shell Rotella® ELC is available as a concentrate and as 50/50 and 60/40 volume mixtures of Shell Rotella® ELC with deionized water.

Part No.   $0.00

Shellzone® Antifreeze is a high quality, single phase, ethylene glycol based antifreeze. It is a low silicate, all-purpose coolant designed for use in both automotive and heavy duty diesel engines (with the use of SCA’s). Shellzone® Antifreeze Prediluted 50/50 is a 50/50 volume mixture of Shellzone® Antifreeze with deionized water.

Part No.   $0.00

Shell DEX-COOL® Extended Life Antifreeze/Coolant is a single-phase, ethylene glycol based, extended life, universal automotive engine coolant based on a unique extended life carboxylate inhibitor system. Shell DEX-COOL® is suitable for a five year or 150,000 mile service life in automotive applications. In heavy-duty applications not requiring nitrite Shell DEX-COOL® is suitable for a service life of 400,000 miles or 8,000 hours. Shell DEX-COOL® Prediluted 50/50 is a 50/50 volume mixture of Shell DEX-COOL® with deionized water.

Part No.   $0.00

Shell Cassida® Chain Oil HT is a fully synthetic, high performance silicone based oil which has been specially formulated for the food industry to lubricate drive and transport chains operated at elevated temperatures. It is based on synthetic components chosen for their ability to meet the stringent requirements of the food industry. It is registered by the NSF (Class H1) for use where there is potential for incidental contact with food. This product meets the former requirements (1998) of the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food contact). Shell Cassida® Chain Oil HT contains only substances permitted under US 21 CFR 178.3570 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell Cassida Chain Oil 150 and 1000 are fully synthetic, high performance anti-wear chain oils which have been specially formulated to lubricate drive and transport chains used in the food industry. They are based on a careful blend of synthetic fluids and carefully selected additives chosen for their ability to meet the stringent requirements of the food industry. They are registered by the NSF (Class H1) for use where there is potential for incidental contact with food. These products meet the former requirements (1998) of the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food contact) and listed in Miscellaneous Publication No. 1419 “List of Proprietary Substances and nonfood Compounds” Shell Cassida Chain Oil 150 and 1000 contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell Callina Fluid 1100 is a mildly alkaline liquid developed for general purpose cleaning. Shell Callina Fluid 1100 contains a citrus-based solvent that is non-hazardous and very effective in degreasing. Shell Callina Fluid 1100 can be used at 0.5% to 25% by volume for heavier duty applications. The product may be used at ambient to 180ºF depending on the application.

Part No.   $0.00

Shell Callina Fluid 1200 is a mild alkaline liquid concentrate developed to remove a variety of heavy soils from a wide variety of surfaces. Callina 1200 does not contain silicates or nitrites.

Part No.   $0.00

Shell Callina Fluid 2100 is a mildly alkaline product specifically developed to replace nitrite-containing cleaner/rust preventatives. Shell Callina Fluid 2100 is a nitrite-free compound that will provide excellent protection on steel and cast iron substrates. Shell Callina Fluid 2100 can be used as a final rinse at low concentration or as a cleaner/inhibitor in one-stage operations.

Part No.   $0.00

Shell Callina Fluid 3100 is a liquid alkaline compound developed for immersion cleaning operations. Shell Callina Fluid 3100 is very effective in removing and emulsifying heavy lubricants on ferrous and non-ferrous substrates. Shell Callina Fluid 3100 should not be used in spray washers.

Part No.   $0.00

Shell Callina Fluid 3120 is a strong, alkaline compound designed to clean heavy soils in immersion or spray systems. Shell Callina Fluid 3120 does not contain silicates or other film forming materials which might interfere with subsequent operations. It is chelated to control scale build-up in wash systems. This product is suitable for use on steel but should not be used on galvanized surfaces. Shell Callina Fluid 3120 can be used to etch surfaces of metals being processed.

Part No.   $0.00

Shell Callina Fluid 3250 is a liquid alkaline compound specifically developed for spray cleaning operations. Shell Callina Fluid 3250 will not emulsify oil-containing compounds. Shell Callina Fluid 3250 is very effective in removing light to medium drawing and stamping compounds from ferrous and non-ferrous substrates.

Part No.   $0.00

Shell Callina Fluid 1210 is a general maintenance and floor cleaner that provides excellent performance in a variety of general maintenance applications.

Part No.   $0.00

Shell Madrela Oils GP have been specially developed for cylinder lubrication of reciprocating compressors handling natural gas at high pressure. They are based on polyglycol base fluids and offer significant benefits over mineral oil-based products, especially in gas re-injection compressor applications.

Part No.   $0.00

Shell Madrela® S is a premium quality fluid based on synthetic and severely hydroprocessed base oils and selected additives specially designed to meet the demanding needs of rotary and screw gas compressors.

Part No.   $0.00

Shell Madrela® S is a premium quality fluid based on synthetic and severely hydroprocessed base oils and selected additives specially designed to meet the demanding needs of rotary and screw gas compressors.

Part No.   $0.00

Shell Corena® Oils K are premium quality compounded cylinder lubricants specifically formulated for wet gas or hydrocarbon gas compressors. They contain polar or fatty oils which enable the lubricant to resist being washed off cylinder walls by the action of wet air or gas. Shell Corena® Oils K also resist the solvent action of hydrocarbon gases such as propane and butane, as well as certain organic chemicals such as ketones and aldehydes.

Part No.   $0.00

Shell Cassida® Fluid CR 46 is a high performance fluid specially developed for use in rotary screw and vane air compressors used in the food and beverage processing and packaging industry. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell Garia Oils 631S-32 and Shell Garia 632S-46 lubricants are dark colored, heavy-duty, active sulfur cutting oils designed for tough machining operations such as threading, tapping, and broaching on metals and alloys with low machinability ratings.

Part No.   $0.00

Shell Garia 4402 CM-32 is a premium quality, light colored, extreme pressure cutting oil manufactured from blends of solvent refined mineral oils and selected additives. It is intended for medium to high severity cutting operations of ferrous metals.

Part No.   $0.00

Shell Garia Alum-Mag and Shell GariaÆÊ Alum-Mag Special are low viscosity, non-active cutting oils designed for use in light duty machining and grinding operations on ferrous and non-ferrous metals, particularly aluminum, magnesium and their alloys. Shell GariaÆÊ Alum-Mag and Shell GariaÆÊ Alum-Mag Special are transparent, light colored cutting oils that have been formulated using high quality refined base stocks. Shell GariaÆÊ Alum-Mag is a straight mineral oil. Shell GariaÆÊ Alum-Mag Special contains fatty oil which provides enhanced lubricity and improved surface finish. Both products have low viscosities which provide faster wetting of metal surfaces and penetration to the cutting zone. The products exhibit good cooling properties and oxidation stability.

Part No.   $0.00

Shell Garia Oils are light colored, anti-mist, active sulfur cutting oils designed for use in moderate to severe machining operations. Shell GariaÆÊ cutting oils are available in different EP levels and viscosity grades to cover a wide variety of machining operations and metals.

Part No.   $0.00

Shell Macron® Oil 2606 M-18 is a high performance cutting oil for cutting operations on medium and high alloy steels as well as yellow metals. Shell Macron® Oil 2606 M-18 is formulated using carefully selected mineral oils. A combination of polar extreme pressure additives with anti-wear additives provide the oil with high load carrying capabilities. This combination of additives helps to reduce friction which can result in extended tool life while providing a good surface finish of the machined workpiece. Shell Macron® Oil 2606 M-18 is formulated with an effective anti-mist additive, to help reduce misting in the shop.

Part No.   $0.00

Shell Macron® Oil 2620 M-32 is a high performance, chlorine free cutting oil for operations on medium and high alloy steels or yellow metals. Shell Macron® Oil 2606 M-32 is formulated using carefully selected mineral oils. A combination of polar extreme pressure additives with anti-wear additives provide the oil with high load carrying capabilities. This combination of additives helps to reduce friction leading to extended tool life while providing a good surface finish of the machined workpiece. The oil is also formulated with an effective anti-mist additive to help reduce misting in the shop.

Part No.   $0.00

Shell Macron cutting oils are transparent, light colored cutting oils formulated from high quality severely hydroprocessed base stocks with a naturally high viscosity index. The Shell Macron 221CM and 222CM cutting oils are formulated with a conventional chlorinated extreme pressure additive, whereas the Shell MacronÆÊ ¡§M Series¡¨ of cutting oils utilize a combination of passive and inactive extreme pressure additives. The EP properties of the Shell MacronÆÊ cutting oils allow faster machining rates, help extend tool life, and protect against staining of yellow metals. The Shell MacronÆÊ additive systems provide excellent performance in reacting at the chip-tool interface to reduce friction, but will not promote unfavorable reactions with internal components in hydraulic and lubrication systems.

Part No.   $0.00

Shell Garia 601 M-12 and M-22 are neat cutting oils for machining of high alloy steels (stainless, heat resistant, austenitic, etc.) and aluminium or magnesium alloys. The oils show excellent results in working with many difficult operations like broaching, deep-hole drilling, tapping, shaping, and shaving of gears. Shell Garia 601 M-12 and M-22 products are also very good grinding oils.

Part No.   $0.00

Shell Fenella Fluid D 601 is a chlorine free, high performance water miscible fluid for deep drawing operations on ferrous metals.

Part No.   $0.00

Shell Fenella Oil D 1602 is a special heavy duty oil for drawing, forming, blanking and profiling low and high alloyed steels or stainless steel.

Part No.   $0.00

Shell Fenella Fluid D 4450 is soluble oil used for perforating, blanking and forming

Part No.   $0.00

Shell Fenella Fluid D 4470 is highly chlorinated, heavy-duty, emulsifiable drawing oil for very severe drawing.

Part No.   $0.00

Shell Fenella VD 201 N is an evaporative product for stamping and drawing of thin non ferrous and ferrous materials. The product does not leave a residual film or react with paint. Degreasing of parts before assembly or welding is not necessary.

Part No.   $0.00

Shell Fenella VD 601 N is a volatile product for stamping and drawing of medium thinkness ferrous materials. The product does leave a minimal residual film and doesn’t react with paint.

Part No.   $0.00

Shell Macron EDM 130 is a premium dielectric fluid meeting the requirements for insulation and controlled dielectric discharge during electric discharge machining operations. Shell MacronÒ EDM 130 is formulated with a highly refined, narrow cut paraffinic base stock. The product is colorless and virtually odorless. The product exhibits a relatively high flash point that helps reduce the possibility of fire. The low viscosity of the fluid provides good circulation through the spark gap and more rapid removal and settling of metal fines. Shell MacronÒ EDM 130 has excellent oxidation stability which helps reduce the formation of oxidation products that will alter the dielectric strength of the fluid. Shell MacronÒ EDM 130 exhibits a high dielectric strength which provides insulation of the tool and workpiece and helps control electric discharge during the machining operation. Shell MacronÒ EDM 130 is also extremely effective as a glass grinding fluid.

Part No.   $0.00

Shell DIALA® Oil AX meets standard specifications required by both ANSI/ASTM D 3487 and NEMA TR-P8-1975 for domestic electrical oil applications. These two specifications of electrical oils, Type I and Type II, are covered in these specifications. Type I oil is intended for use where normal oxidation resistance is required. Shell DIALA® Oil AX is a Type II oil and is for more severe service applications requiring greater oxidation resistance Shell DIALA® Oil AX has high electrical resistance and is thermally and oxidatively stable.

Part No.   $0.00

Shell Diala® Oil HFX is a fire-resistant, inhibited electrical insulating fluid, for use in electrical systems where low flammability and improved fire safety characteristics are desired.

Part No.   $0.00

Shell Rotella® T motor oil with Triple ProtectionTM technology is a unique, latest generation premium heavy-duty motor oil that meets or exceeds the service requirements of virtually all diesel engine manufacturers – for both the latest 2007-emission compliant and older engines. It is suitable especially for virtually all on-highway service applications, and is also suitable for off-highway applications.

Part No.   $0.00

Shell Rimula ® Oils are high ash level oils formulated for excellent diesel engine performance. They meet four-stroke cycle diesel engine manufacturers’ warranty and service performance requirements for naturally-aspirated and turbo charged engines in many kinds of service. For more than 35 years, Shell Rimula ® Oils have enjoyed an excellent reputation as premium Caterpillar Series 3/API CD-plus and CF quality engine oils. Shell Rimula ® Oils are available in SAE viscosity grades 10W, 30, and 40.

Part No.   $0.00

Shell Rotella® T Single Grade Oils are high quality single grade oils blended to provide excellent performance in diesel engines of many major manufacturers and in many gasoline, LPG or LNG engines (follow the correct performance grade/viscosity/temperature guidelines). Additionally, for heavy duty transmission applications, the SAE 10W and 30 grades are suitable for use in applications specifying the use of Caterpillar TO-2 and Allison’s C-4 performance fluids.

Part No.   $0.00

Shell Rimula® Premium oils are extra high performance heavy-duty gasoline and diesel engine oil for longer oil and engine life in turbo- and non-turbocharged engines. Designed for fleet use, Shell Rimula® Premium oils are available in SAE viscosity grades SAE 15W-40 and 10W-30.

Part No.   $0.00

Shell Omala® Fluids HD is versatile, premium quality extreme pressure fluids designed to lubricate industrial gear systems. They are produced using synthetic hydrocarbon base fluids in combination with carefully selected additives. The resulting fluid is a high performance lubricant that provides excellent performance in severe operating conditions.

Part No.   $0.00

Shell Tivela S is an advanced synthetic heavy duty industrial gear lubricant line formulated using specially selected polyalkylene glycol base fluids and additives. Shell Tivela S offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency in comparison to mineral based products, long service life and high resistance to micro-pitting. Shell Tivela S resists the formation of harmful oxidation products at high temperatures, helping to improve system cleanliness and therefore reliability of the equipment.

Part No.   $0.00

Shell Cassida® Fluids GL are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Registered by NSF (Class H1) for use where there is potential for incidental contact with food, these products meet the former guidelines (1998) of the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food contact and in Publication No. 1419 “List of Proprietary Substances and Nonfood Compounds”. Shell Cassida® Fluids GL contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell Cassida® Fluids GLE is fully synthetic, high performance, anti-wear gear lubricants that were specifically designed for use in the food and beverage canning industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Registered by the NSF (Class H1) for use where there is potential for incidental contact with food. This product line meets the former requirements (1998) of the US Department of Agriculture (USDA) for H1 use (lubricant with incidental food contact). Product contains only substances permitted under US 21 CFR 178.3570, 178.3620 and US 21 CFR 182 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell Cassida® Fluids WG are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micropitting is needed in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell FM Gear Oils 220 and 460 are recommended for the lubrication of gear sets in food plants where there is the possibility of incidental contact of the lubricant with food being processed. These colorless, odorless products, are manufactured from high quality base stocks and contain selected additives to provide long term oxidation stability, rust protection, wear protection properties, and good demulsibility. Shell FM Gear Oils are manufactured in accordance with FDA 21 CFR 178.3570 and meet former 1998 USDA guidelines as an H-1 lubricant with incidental food contact for use in plants operating under the Federal Meat and Poultry Products Inspection Program. Shell FM Gear Oils are certified Kosher-Parve by the Kosher Overseas Association of America.

Part No.   $0.00

Shell FM Gear Oil TLS 150 is a specialty anti-wear gear lubricant which is specifically designed for use in the food and beverage canning industry. It is based on a careful blend of fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. It is registered by the NSF (Class H1) for use where there is potential for incidental contact with food. This product meets the former requirements (1998) of the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food contact). Shell FM Gear Oil TLS 150 contains only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell OmalaÆÊ Oils are high quality, extreme-pressure oils designed for the lubrication of heavy-duty industrial gears. Their high load carrying capacity and anti-friction characteristics combine to offer exceptional performance in gears and other industrial applications including some mist applications.

Part No.   $0.00

Shell Valvata® Oils J are premium quality, high viscosity, low volatility oils containing fatty compounds.

Part No.   $0.00

Shell Morlina® HS are premium quality, highly refined lubricating oils formulated for use in high-speed, lightly loaded bearings, running at speeds of 20,000 to 40,000 RPMs, found in textile spinning frames and in automated machine tools. Shell Morlina® HS provide excellent oxidation stability, rust protection and resistance to deposit formation. Their low viscosities reduce oil thickness, lowering operating temperatures by reducing friction. The carefully balanced anti-wear chemistry contained in Shell Morlina® HS helps extend equipment life.

Part No.   $0.00

Shell SMC Lubricant is a high performance, semisynthetic, non-bitumastic viscous lubricant specifically developed to satisfy the demands of heavily loaded slow rotating journal bearings. Shell SMC Lubricant is formulated to minimize brass bearing and steel roller wear and maintain normal bearing temperatures under extreme operating conditions. Shell SMC Lubricant incorporates synthetic thickeners and high viscosity mineral oils blended with extreme pressure additives to give a high performance sugar mill brass bearing lubricant.

Part No.   $0.00

Shell Carnea® Oils E are highly refined medium viscosity index mineral oils with naturally low pour points. They are economical oils for non-critical light and medium duty applications, where service temperatures are moderate and long service life is not required. They are available in 5 different viscosity grades.

Part No.   $0.00

Shell Tonna® Oil G is premium quality machine oil designed with special additives that prevent stick-slip. It is specially formulated to meet the requirements of Goss International printing presses. It contains a tackiness additive that helps to prevent the oil from being squeezed out of small clearances by heavily loaded machines, adhesion to parts to give rust protection, or running off vertical ways.

Part No. 65556   $0.00

Shell Adrana D 208 is a high quality, general-purpose metalworking fluid for easy to medium duty applications on ferrous metals.

Part No.   $0.00

AeroShell Grease 7 is an advanced multi-purpose grease, composed of a synthetic oil thickened with Microgel®, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and has excellent resistance to water. The useful operating temperature range is –73°C to +149°C. Approved MIL - PRF-23827C (Type II )

Part No.   $0.00

Shell Nerita HV uses advanced XHVI base oils to deliver excellent performance in electric motors and high speed bearing applications.

Part No.   $0.00

Shell Rhodina Grease SDX 2 is a heavy-duty grease thickened with an anhydrous 12-hydroxystearate thickener and formulated with graphite and molybdenum disulfide (moly) for extreme pressure performance.

Part No.   $0.00

Stamina Grease HSX 2 is a specially formulated polyurea grease containing a synthetic base oil and high performance corrosion and oxidation inhibitors. In addition,it also contains molybdenum disulfide ("moly") as a lubricity adjunct. This grease is especially suitable for lubrication of bearings under extreme temperature conditions.

Part No.   $0.00

Shell Stamina Grease HDS is specially formulated R & O polyurea greases containing a synthetic base fluid and high performance corrosion and oxidation inhibitors. Shell Stamina Grease HDS also contains carefully selected extreme pressure additives and is especially suitable for lubrication of heavy-duty, slow moving plain and rolling element bearings operating in the severe environments found in the steel, paper and chemical industry.

Part No.   $0.00

Shell Stamina Grease RL 2 is a high technology grease based on mineral oil with a special diurea thickener to give long life, low wear and shear-stable properties at high temperatures in industrial bearings.

Part No.   $0.00

AeroShell Grease 6 is a general purpose grease composed of a mineral oil thickened with Microgel®, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability. The useful operating temperature range is –40°C to +121°C. Approved MIL-PRF-24139A Meets MIL-G-7711A

Part No.   $0.00

AeroShell Grease S.7108 is a gasoline and oil resistant grease, composed of a clay thickened synthetic resin fortified with corrosion inhibitors and metal deactivator. SAE-AMS-G-6032

Part No.   $0.00

AeroShell Grease 5 is a high temperature grease composed of a mineral oil thickened with Microgel®, possessing good load-carrying ability. It is inhibited against oxidation and corrosion and has excellent resistance to water. The useful operating temperature range is –23°C to +177°C. Meets MIL -G- 3545C

Part No.   $0.00

AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil thickened with Microgel®, with outstanding performance characteristics. Appropriate additives are included to achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties. The useful operating temperature range is –65°C to +204°C. Approved MIL-PRF-81322F NLGI Grade 2 Approved DOD-G-24508A

Part No.   $0.00

AeroShell Grease 33 is a synthetic universal airframe grease composed of a lithium complex thickened synthetic base oil with corrosion and oxidation inhibitors and load carrying additives. The useful operating temperature range is –73°C to +121°C. Approved MIL-PRF-23827C (Type I )

Part No.   $0.00

Shell Albida® Grease SLC 220 is a lithium complex grease compounded with selected synthetic polyalphaolefins. The combination of the complex grease thickener with the synthetic polyalphaolefin base fluids allows this product to perform well under more severe operating conditions now being imposed on industrial and other heavy-duty equipment. The lithium complex thickener provides excellent mechanical stability and a high dropping point. The synthetic polyalphaolefins provide enhanced high and low temperature performance compared to conventional mineral oil based greases because of their inherent high viscosity indices. The synthetic polyalphaolefins also respond well to anti-oxidants thus extending the life of the product in severe applications when compared to mineral oil based greases.

Part No.   $0.00

Alvania® Grease CG is specially formulated with a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to the high centrifugal forces normally found in couplings.

Part No.   $0.00

Shell Rhodina Grease BBZ is specifically designed for high demanding outdoor applications, in particular when protection against false brinelling and fretting corrosion is required – even at very low temperatures.

Part No.   $0.00

Shell Stamina® Grease RLS 2 is specially formulated R & O polyurea greases containing a synthetic base fluid, and high performance corrosion and oxidation inhibitors. This grease does not contain EP additives and is especially suitable for lubrication of ball and roller bearings such as those found in industrial applications. Shell Stamina® Grease RLS 2 is formulated using a polyurea thickener, special additives, and an ISO 100 synthetic base fluid. This grease exhibit excellent resistance to water, corrosion, and oxidation. Superior resistance to rust and corrosion is provided, even in the presence of salt water. It offers outstanding performance over a wide range of operating temperatures and are able to withstand extended high operating temperatures. This grease will allow bearings to start and run even at low ambient temperatures and are especially recommended where frequent equipment relubrication may be difficult or impossible to achieve in service. The combination of the synthetic base fluid and the polyurea thickener reduces service hardening of the grease at prolonged elevated temperatures.

Part No.   $0.00

Shell Stamina® Grease RLS 2 is specially formulated R & O polyurea greases containing a synthetic base fluid, and high performance corrosion and oxidation inhibitors. This grease does not contain EP additives and is especially suitable for lubrication of ball and roller bearings such as those found in industrial applications. Shell Stamina® Grease RLS 2 is formulated using a polyurea thickener, special additives, and an ISO 100 synthetic base fluid. This grease exhibit excellent resistance to water, corrosion, and oxidation. Superior resistance to rust and corrosion is provided, even in the presence of salt water. It offers outstanding performance over a wide range of operating temperatures and are able to withstand extended high operating temperatures. This grease will allow bearings to start and run even at low ambient temperatures and are especially recommended where frequent equipment relubrication may be difficult or impossible to achieve in service. The combination of the synthetic base fluid and the polyurea thickener reduces service hardening of the grease at prolonged elevated temperatures.

Part No.   $0.00

AeroShell Grease 14 is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidation and corrosion inhibited. The useful operating temperature range is –54°C to +93°C. Approved MIL -G-25537C

Part No.   $0.00

Shell Cassida® Grease EPS 00, 1 and 2 are very high performance extreme pressure lubricants specially blended for the grease lubrication of machinery used in food and beverage processing and packaging industry. They are based on an aluminium complex thickener, synthetic fluid and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell Cassida® Grease HTS 2 is a high performance, high temperature lubricant specially blended for the grease lubrication of machinery used in food and beverage processing and packaging industry. It is based on a bentone thickener, synthetic fluid and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell Cassida® Greases RLS 00, 0, 1, and 2 are specially blended for the grease lubrication of machinery used in the food industry. They are based on an aluminum complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell FM Grease HD 2 is a heavy-duty product specially designed for the grease lubrication of food processing machinery where frequent changes and re-applications of the grease charge are required, such as machines used to process pet food and animal feed.

Part No.   $0.00

Shell Grease FM 2 is a mineral oil based NSF H1 registered food grade grease with excellent performance features. The use of an aluminum complex thickener system in combination with a “white oil” base fluid results in excellent anti-wear and load carrying properties. The thickener system in combination with carefully selected additives results in resistance to rust, corrosion and oxidation. In applications where water contamination is a concern, Shell Grease FM 2 is highly resistant to water washout.

Part No.   $0.00

Shell Albida® Greases EP are high performance multi-purpose greases formulated for industrial applications. They are based on a high quality mineral oil, lithium complex soap thickener and carefully selected additives to provide excellent high temperature properties as well as resist oxidation, wear and corrosion. Shell Albida Greases EP are especially suitable for heavy-duty bearings operating at high temperature and under severe load.

Part No.   $0.00

Shell Albida® Grease SLC 220 is a lithium complex grease compounded with selected synthetic polyalphaolefins. The combination of the complex grease thickener with the synthetic polyalphaolefin base fluids allows this product to perform well under more severe operating conditions now being imposed on industrial and other heavy-duty equipment. The lithium complex thickener provides excellent mechanical stability and a high dropping point. The synthetic polyalphaolefins provide enhanced high and low temperature performance compared to conventional mineral oil based greases because of their inherent high viscosity indices. The synthetic polyalphaolefins also respond well to anti-oxidants thus extending the life of the product in severe applications when compared to mineral oil based greases.

Part No.   $0.00

Alvania® Grease CG is specially formulated with a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to the high centrifugal forces normally found in couplings.

Part No.   $0.00

Shell Darina® Greases SD are multipurpose, non-soap greases. They give excellent lubrication for extended time periods, in wet or dry applications, and over a wide range of temperatures. They are also formulated to provide extreme pressure (EP) characteristics.

Part No.   $0.00

Shell Darina® Greases RL 1 and 2 are non-melting bentonite (clay) greases containing rust and oxidation inhibitors. They exhibit excellent mobility making them ideal for low temperature applications. Due to the inert nature of the bentonite clay, these greases are also suitable for applications where the lubricant is exposed to contaminants such as water and chemicals found in many industrial applications including chemical plants, paper mills, as well as mining and process plants.

Part No.   $0.00

Alvania® Greases EP are brown in color and are manufactured with a lithium 12-hydroxystearate-soap thickener. Fortified with extreme pressure additives, they provide increased load carrying properties and corrosion resistance.

Part No.   $0.00

Alvania® Greases RL 1, 2 and 3 are smooth-textured, amber colored lithium soap-thickened greases. These greases are also inhibited with additives that assure long service life and provide excellent lubrication and corrosion protection. Alvania Greases RL are excellent as general plant and electric motor bearing lubricants. Alvania Greases RL 1 and 2 are readily pumpable in pressure grease dispensing systems.

Part No.   $0.00

Shell Malleus GL is a range of a premium quality, lead and solvent free, full EP lubricants developed for the lubrication and protection of open gears and wire ropes subjected to extremes of ambient temperature and operating conditions. They are a unique blend of high quality paraffinic mineral and synthetic base oils with carefully selected additives to provide optimum performance. Its balanced formulation allows the lubricant to stay soft and pliable over long periods, thus eliminating the build-up of lubricant in the roots of the gear teeth.

Part No.   $0.00

Shell Malleus Grease OGM Heavy is primarly designed for use in very heavy applications, and operations under severe conditions, in mining equipments, shovels, draglines and excavators in open cut operations. Open Gear Lubricant for ball mills and kilns. Malleus OGM Heavy is based upon an Aluminium Complex soap thickener dispersed in a high viscosity, very high quality mineral base oil containing enhanced extreme pressure – antiwear chemistry.

Part No.   $0.00

Macron® Oil 2425 S-14 is a high performance grinding oil formulated specifically for flute grinding on high-speed steel, and is suitable for use with ceramic, diamond and boron nitride grinding wheels. Shell Macron Oil 2425 S-14 can also be used for grinding of spiral bevel gears and flat or cylindrical grinding processes on a complete range of steels and some non-ferrous metals. Shell Macron Oil 2425 S-14 is chlorine free and is formulated using a hydrotreated base oil in combination with chemically active phosphorus and special polar additives, which impart high load carrying properties. This helps to extend wheel life and provide excellent surface finish of the workpiece.

Part No.   $0.00

Shell Industrial ELC products are a series of extended life industrial coolant/antifreeze and heat transfer fluids formulated for stationary equipment applications. These products are based on a unique extended life carboxylate inhibitor system and nitrite/molybdate as secondary inhibitors. Shell Industrial ELC provides complete protection of cooling system components. Shell Industrial ELC products require no inhibitor additions for 32,000 hours or 6 years. These products do not contain borates, phosphate, amines and silicates and are available in ethylene glycol and propylene glycol based fluids

Part No.   $0.00

Shell Industrial HTF Heat Transfer Fluids are a series of conventional technology, high quality, industrial coolant/antifreeze and heat transfer fluids.

Part No.   $0.00

Shell Industrial ELC products are a series of extended life industrial coolant/antifreeze and heat transfer fluids formulated for stationary equipment applications. These products are based on a unique extended life carboxylate inhibitor system and nitrite/molybdate as secondary inhibitors. Shell Industrial ELC provides complete protection of cooling system components. Shell Industrial ELC products require no inhibitor additions for 32,000 hours or 6 years. These products do not contain borates, phosphate, amines and silicates and are available in ethylene glycol and propylene glycol based fluids

Part No.   $0.00

Shell Industrial HTF Heat Transfer Fluids are a series of conventional technology, high quality, industrial coolant/antifreeze and heat transfer fluids.

Part No.   $0.00

Shell Thermia® Oil C is a specially selected thermally stable mineral oil containing an anti-oxidant designed for heat transfer applications. The thermal stability of heat transfer oil is a prime consideration. Nearly as important is the oxidation stability of the oil. While most hot oil units are designed to limit (or eliminate) contact of the circulating hot oil with air, some con-tact is inevitable at startup in the expansion tank during storage and from air leaks. The ability of Shell Thermia® Oil C to resist oxidative degradation has been demonstrated in tests simulating service conditions and confirmed by excellent performance in commercial applications.

Part No.   $0.00

Shell Industrial HTF Heat Transfer Fluids are a series of conventional technology, high quality, industrial coolant/antifreeze and heat transfer fluids.

Part No.   $0.00

AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. AeroShell Fluid 31 has a specially designed base stock which imparts a relatively high flash point, excellent low temperature properties and good oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated with high technology additives to provide oxidation and corrosion resistance, antiwear, and anti-foaming protection. AeroShell Fluid 31 is superclean filtered to ensure optimum performance in particulate monitored systems. AeroShell Fluid 31 is dyed red. The useful operating temperature range is –40 to +205°C. Approved MIL-PRF-83282D

Part No.   $0.00

AeroShell Fluid 4 is a mineral hydraulic oil with very good low temperature characteristics and capable of operating over a wide temperature range. AeroShell Fluid 4 is composed of a mineral oil base stock and a complex additive package which results in a product with excellent low temperature flow and anti-wear properties, exceptional antifoam characteristics, and excellent oxidation stability. AeroShell Fluid 4 is dyed red. Meets MIL-H-5606A

Part No.   $0.00

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties. AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation - corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is capable of wide temperature range operation. AeroShell Fluid 41 is dyed red. Approved MIL-PRF-5606H* (both U.S. and European production)

Part No.   $0.00

Shell Tellus Oils STX are premium hydraulic oils based on ashless anti-wear technology, selected high quality Group II base oils and a shear stable viscosity index improver to enhance and help maintain excellent viscosity/temperature characteristics. They are designed to meet the requirements of a large range of industrial and hydraulic applications. They are especially suited for operating conditions where wide variations in oil temperature during service are encountered.

Part No.   $0.00

Shell TURBO® FLUID DR 46 is a high performance, fire-resistant hydraulic fluid based on tri-aryl phosphate manufactured from carefully selected raw materials. This product is designed for use in electro-hydraulic governor control systems of steam turbines, including systems using fine tolerance servo valves. It does not contain mineral oil, polyolesters, chlorinated hydrocarbons or water.

Part No.   $0.00

Shell Naturelle Fluids HF-E are advanced biodegradable hydraulic fluids for use in power transmission and hydraulic systems working in environmentally sensitive areas. Synthetic esters and a specially tailored additive system provide Shell Naturelle Fluids HF-E with a excedllent balance of biodegradability and lubrication performance.

Part No.   $0.00

Shell Tellus®Premium Oils are high performance hydraulic oils blended with patented Shell additive technology in combination with hydrotreated base oils to meet the requirements of the most demanding hydraulic systems.

Part No.   $0.00

Shell Tellus Fluid HD is an anti-wear, hydraulic fluid based on advanced synthetic hydrocarbon technology. Shell TellusFluid HD is available in ISO viscosity grade 32. The use of synthetic base fluids with carefully selected additives results in excellent oxidation stability and a wide temperature operating range.

Part No.   $0.00

Shell Tellus Oil DO 46 is a detergent/dispersant, anti-wear, mineral oil based, specialty hydraulic oil for systems where emulsifiable oils are preferred. Shell Tellus Oil DO 46 is based on zinc free anti-wear technology.

Part No.   $0.00

Shell Tellus Oils are premium performance mineral based hydraulic fluids formulated with patented Shell additive technology in combination with high quality base oils to meet the requirements of a wide range of industrial and mobile hydraulic applications.

Part No.   $0.00

Shell Tellus Oils T are premium quality hydraulic oils formulated with proprietary anti-wear technology and a shear stable viscosity index improver to enhance and maintain excellent viscosity/temperature characteristics. These oils are designed to meet the requirements of a large range of industrial and mobile hydraulic applications.

Part No.   $0.00

Shell Tellus®Premium Oils are high performance hydraulic oils blended with patented Shell additive technology in combination with hydrotreated base oils to meet the requirements of the most demanding hydraulic systems.

Part No.   $0.00

Shell Tellus Oils S are premium, non-zinc, anti-wear hydraulic oils formulated to provide exceptional performance in hydraulic fluid systems which operate under severe conditions. Based on unique zinc- and chlorine-free technology, Shell Tellus Oils S protect the equipment and are designed to provide excellent anti-wear properties. The products exhibit extended service life because they are formulated to be thermally stable and resistant to oxidation. Shell Tellus Oils S are exceptionally stable in the presence of water.

Part No.   $0.00

Shell Cassida® Fluids HF are specially developed lubricants for use in machinery used in the food and beverage processing and packaging industry. They are high performance, anti-wear multipurpose lubricants and are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Registered by NSF (Class H1) for use where there is potential for incidental contact with food. These products meet the former guidelines (1998) of, and were previously authorized by, the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food contact). Product contains only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell FM Hydraulic Oils are anti-wear multi-purpose lubricants, which are specifically designed for use in the food and beverage processing and packaging industry. They are based on a careful blend of base fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Registered by NSF (Class H1) for use where there is potential for incidental food contact, these products meet the former guidelines (1998) of the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food contact). These products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Part No.   $0.00

Shell Tellus EE hydraulic fluids are designed to help users improve the energy efficiency of their hydraulic systems without compromising the protection of the system or maintenance procedures of their equipment and operations. Shell Tellus EE has been found to improve energy efficiency in applications such as plastic injection moulding and metal pressing by an average of 8%1. In addition, Shell Tellus EE is also designed to help equipment service life and lower maintenance costs through providing outstanding wear protection and long oil life capability.

Part No.   $0.00

Shell Irus Fluid C-NA is a water solution of diethylene glycol and an effective additive package. In addition to water (approximately 40%) and glycol it contains a combination of anti-wear agents and rust inhibitors designed to make it suitable for use in a wide variety of hydraulic systems. Shell Irus Fluid C-NA protects high pressure pumps from excessive wear. This product also offers good rust protection both in the fluid immersed sections of the system and in the vapor spaces where condensed water typically collects. Shell Irus Fluid C-NA is foam resistant and shear stable. Its higher specific gravity allows any oil contamination to float on the surface where it can be removed by conventional skimming equipment. Low temperatures are not a problem since the product’s glycol content protects against freezing.

Part No.   $0.00

Shell Irus Fluids DU are advanced, synthetic, anhydrous less flammable hydraulic fluids based on organic esters and proven additives. These ISO Class HFDU fluids are specially designed to provide good performance in conventional hydraulic systems and have better fire resistance than mineral oils. They are also biodegradable with a low ecotoxicity, and are particularly suited for use in environmentally sensitive areas.

Part No.   $0.00

Shell Tonna Oils V are specially designed for the lubrication of machine tool slides and tables. They are based on highly refined mineral oils and contain additives to enhance tackiness, anti-wear and stick-slip characteristics. They are specially recommended in cases where high adherence is required.

Part No.   $0.00

Shell Tonna Oils T are specially designed for the lubrication of machine tool slides and tables. They are based on highly refined mineral oils and contain additives to enhance tackiness, anti-wear and stick-slip characteristics. They are specially recommended in cases where high exposure to soluble cutting fluids exist

Part No.   $0.00

Shell Tonna Oils T are specially designed for the lubrication of machine tool slides and tables. They are based on highly refined mineral oils and contain additives to enhance tackiness, anti-wear and stick-slip characteristics. They are specially recommended in cases where high exposure to soluble cutting fluids exist

Part No.   $0.00

Shell Tonna Oils V are specially designed for the lubrication of machine tool slides and tables. They are based on highly refined mineral oils and contain additives to enhance tackiness, anti-wear and stick-slip characteristics. They are specially recommended in cases where high adherence is required.

Part No.   $0.00

Shell Mysella® LA are premium quality heavy-duty oils blended for use in highly-rated, spark-ignition engines which require a “low ash” oil. These natural gas engine oils are formulated with select base stocks and carefully chosen additives for optimum performance. Shell Mysella® LA satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and which employ the latest ‘lean’ or ‘clean’ burn technology.

Part No.   $0.00

Shell Mysella® MA gas engine oils are premium quality and specifically blended for use in highly-rated spark ignition and dual-fuel four-stroke natural gas engines which require medium ash oils or where “sour gas” is in use. It is a blend of specially selected base oils and a balanced package of additives that provide medium ash with low phosphorus and low zinc.

Part No.   $0.00

Shell Mysella® Oils are heavy-duty premium quality ash-free oils designed specifically for lubrication of high performance gas engines which require an “ashless” oil. Formulated with select base oils and a Shell developed ashless additive system, they provide excellent cleanliness and minimum wear. Shell Mysella® Oils minimize combustion chamber and exhaust port deposits while minimizing oil viscosity increase.

Part No.   $0.00

Shell Mysella Oil XL is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition engines which require a low ash oil. Shell Mysella Oil XL satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest ’lean’ or ’clean’ burn technology. Shell Mysella Oil XL is specially developed to provide extended drain intervals in those natural gas engines where oil life is a limiting operational factor.

Part No.   $0.00

Shell Cassida® Silicone Fluid is a fully synthetic high performance multi-purpose fluid, which has been specially formulated for the food industry to lubricate conveyors, slow rotating machinery, small slow speed bearings and pivot points. It is based on a careful blend of synthetic components chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

AeroShell 80 straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant. Approved J-1966 SAE Grade 40

Part No.   $0.00

AeroShell 65 straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant. Approved J-1966 SAE Grade 30

Part No.   $0.00

AeroShell Fluid 2F is an inhibited "flyaway" lubricating oil for the internal protection of piston engines during storage. AeroShell Fluid 2F consists of three parts AeroShell Oil 100 (SAE J-1966 Grade SAE 50) with one part AeroShell Fluid 2XN (MIL-C-6529C Type I) – a corrosion preventative.

Part No.   $0.00

AeroShell 100 straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant. Approved J-1966 SAE Grade 50

Part No.   $0.00

AeroShell 100W Oils were the first non-ash dispersant oils to be used in aircraft piston engines. They combine non-metallic additives with selected high viscosity index base stocks to give exceptional stability, dispersancy and anti-foaming performance. These additives leave no metallic ash residues that can lead to deposit formation in combustion chambers and on spark plugs, which can cause pre-ignition and possible engine failure. Approved J-1899 SAE Grade 50

Part No.   $0.00

AeroShell 120W Oils were the first non-ash dispersant oils to be used in aircraft piston engines. They combine non-metallic additives with selected high viscosity index base stocks to give exceptional stability, dispersancy and anti-foaming performance. These additives leave no metallic ash residues that can lead to deposit formation in combustion chambers and on spark plugs, which can cause pre-ignition and possible engine failure. Approved J-1899 SAE Grade 60

Part No.   $0.00

AeroShell 80W Oils were the first non-ash dispersant oils to be used in aircraft piston engines. They combine non-metallic additives with selected high viscosity index base stocks to give exceptional stability, dispersancy and anti-foaming performance. These additives leave no metallic ash residues that can lead to deposit formation in combustion chambers and on spark plugs, which can cause pre-ignition and possible engine failure. Approved J-1899 SAE Grade 40

Part No.   $0.00

AeroShell 120 straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant. Approved J-1966 SAE Grade 60

Part No.   $0.00

AeroShell 65W Oils were the first non-ash dispersant oils to be used in aircraft piston engines. They combine non-metallic additives with selected high viscosity index base stocks to give exceptional stability, dispersancy and anti-foaming performance. These additives leave no metallic ash residues that can lead to deposit formation in combustion chambers and on spark plugs, which can cause pre-ignition and possible engine failure. Approved J-1899 SAE Grade 30

Part No.   $0.00

AeroShell Oil W100 Plus is a new single grade oil that combines the single grade, ashless dispersant performance found in AeroShell Oil W100 and the anti-wear/anti-corrosion additives of AeroShell Oil W15W-50 Multigrade. It’s the oil for pilots who prefer a single grade but who also want the extra protection and performance. Approved SAE J-1899 SAE Grade 50

Part No.   $0.00

AeroShell Oil W 15W-50 is a unique blend of high quality mineral oil and over 50% synthetic hydrocarbon base stocks, plus the AeroShell Oil W ashless dispersant additive system. This semi-synthetic blend offers high performance in a wide variety of applications and conditions. The synthetic base stock performance provides for better cold temperature pumping and protection than single grade oils. In addition, the blend of synthetic and high quality mineral base stocks provide high temperature performance superior to that of other fully approved aircraft piston engine oils. The mineral base stocks help disperse lead by-products of combustion, thereby keeping engines free of "grey paint" or lead sludge that can be a problem with some fully synthetic oils. Approved SAE J-1899 Grade Multigrade

Part No.   $0.00

Shell Voluta quenching oils permit uniform hardening of steels with minimum distortion and discoloration, while helping improve grain structure and promote long service life.

Part No.   $0.00

Shell ClavusÆÊ Oils are highly refined naphthenic base petroleum oils intended for use in compression refrigeration systems containing non-hydroflurocarbon refrigerants such as R-12, R-22, R-502 and ammonia. Shell ClavusÆÊ Oils are specifically processed for use in refrigeration systems. This series covers the two viscosity grades required to meet the needs of most residential and industrial refrigeration systems.

Part No.   $0.00

Shell ClavusÆÊ Oil S 68 is manufactured from highly refined paraffinic base stocks blended with a carefully balanced additive package designed to provide long service life and minimize system deposits. Shell ClavusÆÊ Oil S 68 is specifically formulated to meet the demanding needs of rotary screw compressors used in commercial ammonia refrigeration systems.

Part No.   $0.00

Shell ClavusÆÊ Oils are highly refined naphthenic base petroleum oils intended for use in compression refrigeration systems containing non-hydroflurocarbon refrigerants such as R-12, R-22, R-502 and ammonia. Shell ClavusÆÊ Oils are specifically processed for use in refrigeration systems. This series covers the two viscosity grades required to meet the needs of most residential and industrial refrigeration systems.

Part No.   $0.00

Shell ClavusÆÊ Oil S 68 is manufactured from highly refined paraffinic base stocks blended with a carefully balanced additive package designed to provide long service life and minimize system deposits. Shell ClavusÆÊ Oil S 68 is specifically formulated to meet the demanding needs of rotary screw compressors used in commercial ammonia refrigeration systems.

Part No.   $0.00

Shell Torcula Oils have been developed to meet the special lubrication requirements of all percussion type pneumatic tools, including those subjected to the most arduous conditions. They are based on a blend of highly refined mineral oils and selected additives chosen for their ability to maintain high oil film strength and effectively lubricate the demanding requirements of pneumatic drill impact mechanisms.

Part No.   $0.00

Shell Fenella CSS 200 series are designed for cold rolling mills producing ferrous and non-ferrous material such as high Carbon alloy, copper and stainless steel.

Part No.   $0.00

Shell Ensis PL 1608 is a rust preventive prelube oil designed for application to automotive grade cold rolled steel sheet and coated strip which meets the German VDA 230-201 specification and exhibits excellent drawing properties combined with easy removal.

Part No.   $0.00

Shell Fenella Fluid SRH 80 is an additive ester based hot rolling lubricant for the reduction of hot Strip, Section and Bar steel.

The oil can be applied as both neat oil, or as dispersion in water utilising specific application systems. Shell Fenella Fluid SRH 80 is free from halogens, compatible with industrial water systems and suitable for strip and edge lubrication. It reduces: Roll wear, Power Consumption, Mill Loads, Rolling in Scale, and Surface Defects.

Part No.   $0.00

Shell Fenella Oil P 401 N is a special synthetic lubricant, which was developed for Bundy, to be operational in the production of Cu-coated steel tubes.

Shell Fenella Oil P 401 N is chlorine free product and does not contain heavy metals. It is free from aromatic hydrocarbons. The product gives a very good lubricity and does not leave any carbon residue in and on the tubes after annealing. Shell Fenella Oil P 401 N gives an excellent surface quality of tubes and increases the lifetime of tools.

Part No.   $0.00

Shell Fenella SRC 865 S is a high performance rolling lubricant, which produces mill clean strip. It also has excellent burn-off properties in batch and continuous annealing. Shell Fenella SRC 865 S is normally used as a 2.0 - 3.0% emulsion concentration in water. (0.5 – 1.0% concentration in the last stand system.

Part No.   $0.00

Shell Fenella SRC 866 S is a high performance rolling lubricant, which produces mill clean strip. It also has excellent burn-off properties in batch and continuous annealing. Shell Fenella SRC 866 S is normally used as a 2.0 - 3.0% emulsion concentration in water. (0.5 – 1.0% concentration in the last stand system.

Part No.   $0.00

Shell Callina Fluid 2100 is a mildly alkaline product specifically developed to replace nitrite-containing cleaner/rust preventatives. Shell Callina Fluid 2100 is a nitrite-free compound that will provide excellent protection on steel and cast iron substrates. Shell Callina Fluid 2100 can be used as a final rinse at low concentration or as a cleaner/inhibitor in one-stage operations.

Part No.   $0.00

Shell Ensis Compound DW 1016 is a solvent based rust inhibitor and is intended for use on component parts or finished assemblies and equipment. It provides up to two years indoor or six to nine months outdoor storage protection under typical conditions. Shell Ensis Compound DW 1016 is used as received in dip, spray or fogging equipment where excellent displacement of water or alkaline fluid is required.

Part No.   $0.00

Ensis WB 1200 is a water emulsifiable rust-preventive oil formulated for use on a wide variety of metals. When applied from a 10 to 40 percent water emulsion,Shell Ensis Compound WB 1200 produces a slightly oily film that will provide up to six months indoor corrosion protection.

Part No.   $0.00

Shell Cassida® Fluid PL is a special lubricant with excellent creeping and penetrating features. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell Fenella Fluid SP 802 consists of a synergistic blend of water soluble surfactants and corrosion inhibitors producing corrosion resistance and mild cleaning action to rolls and strip.

Part No.   $0.00

Shell Dromus B provides excellent cooling, lubricity, and rust protection for use in a wide range of grinding and machining operations on ferrous and non-ferrous metals.

Part No.   $0.00

Shell Dromus BLC is a general purpose soluble oil concentrate with and added biocide and extreme pressure performance.

Part No.   $0.00

Shell Dromus® Oil ABD 201 provides excellent cooling, lubricity and rust protection for use in a wide range of grinding and machining operations. Depending on speeds, feeds, and metallurgy, Shell Dromus® Oil ABD 201 can be emulsified typically at 20:1 to 40:1 water/oil ratios for drilling, forming, planing, milling sawing and turning applications.

Part No.   $0.00

Shell Fenella Oils CH are chlorine free, compounded mineral oils designed for use in a wide range of metal forming applications including heading, stamping, rolling, drawing, and extruding of aluminum, copper, ferrous and other non-ferrous metals. Shell Fenella Oils CH 401 and CH 402 possess excellent anti-wear, load carrying, lubricity, and adhesive properties to provide satisfactory lubrication in many metal deformation processes.

Part No.   $0.00

Shell Fenella Oil DS 4430 is a water miscible rolling and stamping oil developed primarily for ferrous and non-ferrous metals. It is formulated to provide a relatively high degree of lubricity and also possesses good detergency and wetting characteristics.

Part No.   $0.00

Shell Fenella Paste DS 1600 is a heavy duty water soluble paste drawing compound suitable for steel and stainless steel. It is sulfur and chlorine free and is suitable for applications where the metal surface needs to be free of sulfur and chlorine containing compounds.

Part No.   $0.00

Shell Metalina B 3650 is a full synthetic, high quality coolant free of chlorine, secondary amines, and boron. It is recommended for medium to heavy duty cutting applications of steel alloys.

Part No.   $0.00

Shell Metalina B 3850 is a full synthetic, high quality biocide free coolant. It is free of chlorine, biocides, secondary amines, and boron. It is specifically designed for medium to heavy duty cutting applications of steel and aluminum alloys (with silicon content >1 %).

Part No.   $0.00

Shell Metalina BY 2211 is a full synthetic, high quality coolant specifically designed for grinding of cemented carbide tools.

Part No.   $0.00

Shell Metalina D 200 is a full synthetic, high quality coolant free of chlorine, nitrite, secondary amines, and hexahydrotriazine. It is recommended for surface and cylindrical grinding of cast iron and ferrous metals.

Part No.   $0.00

Shell Cassida® Fluid RC 220 is a high performance fluid specially developed for use in rotary cooking equipment in food and beverage canning plants. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of this type of equipment.

Part No.   $0.00

FormulaShell® Automatic Transmission Fluid is a premium quality automatic transmission fluid for use in both passenger cars and light trucks requiring a fluid that was previously serviceable by the General Motors DEXRON® III or Ford MERCON® specifications.

Part No.   $0.00

FormulaShell® TYPE F AUTOMATIC TRANSMISSION FLUID is specially formulated for automatic transmissions and power steering units where a Ford Type F or M2C33-F fluid is recommended. Type F fluids are typically recommended for Ford automatic transmissions built prior to the 1977 model year as well as many 1977 through 1980 models.

Part No.   $0.00

Shell Spirax® GSX SAE 50 is the latest addition to the Shell Spirax® family of axle and transmission fluids. It is a synthetic heavy-duty transmission fluid specially formulated for extended drain and severe service applications. This fluid is approved as a Roadranger® Genuine Lubricant for use in Eaton extended warranty transmission service.

Part No.   $0.00

Shell Donax TX Oil is a premium quality synthetic-blend, heavy duty universal power shift and automatic transmission fluid which is suitable for use in transmissions requiring Allison TES-295 fluids. Engineered to meet the requirements of the latest heavy duty transmissions, Donax TX is the ultimate performance synthetic-blend automatic transmission fluid which enables extended service intervals and extended limited warranty. Donax TX remains stable even under severe operating conditions.

Part No.   $0.00

AeroShell Turbine Oil 500 is a 5 mm2/s synthetic hindered ester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and metal passivation. Approved MIL - PRF - 23699F Grade STD

Part No.   $0.00

AeroShell Turbine Oil 555 is an advanced 5 mm2/s synthetic hindered ester oil incorporating a finely balanced blend of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil. Approved DOD-L-85734

Part No.   $0.00

AeroShell Turbine Oil 560 is a third generation, high performance, low coking 5 mm2/s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability. Approved MIL - PRF -23699F Grade HTS

Part No.   $0.00

AeroShell Turbine Oil 750 is a 71⁄2 mm2/s synthetic mixed ester oil containing a thickener and additives which provide excellent load carrying, thermal and oxidation stability.

Part No.   $0.00

Shell Turbo Oil J has been specially formulated to satisfy the demanding requirements of the MHI (Mitsubishi Heavy Industry) non-geared steam & gas turbines. This is based on a blend of specially chosen high quality hydrotreated base oils with selected additives to enhance their rust and oxidation properties.

Part No.   $0.00

Shell Turbo SG Fluid 32 is a synthetic polyalphaolefin based fluid formulated to meet the demands of high output stationary industrial gas turbines. It is blended with carefully selected additives to impart anti-wear, high temperature oxidation and corrosion inhibition, as well as rust protection.

Part No.   $0.00

Shell Turbo® Oils T are premium quality lubricating oils designed to provide excellent lubrication of steam turbines and many other industrial applications. These oils are made from severely hydroprocessed (API Group II) base oils, which have been carefully selected to provide satisfactory viscosity/temperature characteristics, low foaming tendencies and good water separation properties. In addition, they contain proven additives to protect equipment against rusting and to resist oxidation for long service life. Shell Turbo Oils T are available in four ISO viscosity grades from 32 to 100. Grade nomenclature conforms to the ASTM/ISO viscosity system.

Part No.   $0.00

Shell Turbo® Oil TX (formerly Shell Turbo® Oil IG) is a highly refined paraffinic turbine oil especially formulated to lubricate steam turbines as well as meet the higher temperatures found in high output stationary industrial gas turbines. Shell Turbo® Oil TX is available in ISO viscosity grade 32

Part No.   $0.00

Shell Cassida Fluid VP 100 is a high performance fluid specially developed for use in vacuum pumps used in the food and beverage processing and packaging industry. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Part No.   $0.00

Shell Adrana D 408 is a high quality, general-purpose metalworking fluid recommended for light to medium duty operations on a broad range of materials.

Part No.   $0.00

Shell Adrana D 601.01 is a high quality metalworking fluid recommended for medium to heavy duty machining of high carbon steel and alloyed special steels with high tensile strength. It is free of chlorine, nitrite and secondary amines.

Part No.   $0.00

Shell Sitala CD 400 is a chlorinated metalworking fluid recommended for all types of machining operations of ferrous metals and aluminum alloys.

Part No.   $0.00

Shell Sitala D 201.03 is a high quality metalworking fluid recommended for light to medium duty operations on ferrous metals and aluminum. It is free of chlorine, hexahydrotriazine and secondary amines.

Part No.   $0.00

Shell Sitala D 3403 is a high quality, general purpose metalworking fluid for medium to severe duty machining of ferrous metals and aluminum alloys.

Part No.   $0.00

Shell Shell Cardium Fluid EP is a viscous, asphaltic based lubricant containing highly refined mineral oils, and select EP additives. It is diluted with an aliphatic hydrocarbon (high flash point, non-chlorinated) for easier application. is a viscous, asphaltic based lubricant containing highly refined mineral oils, and select EP additives. It is diluted with an aliphatic hydrocarbon (high flash point, non-chlorinated) for easier application.

Part No.   $0.00