AIR-OPERATED DIAPHRAGM PUMPS

Air operated diaphragm pumps are activated by compressed air or any  non-flammable compressed gas.  These pumps are self-lubricated and non-stalling.  A wide range of products can be pumped, from clear water to highly viscous, abrasive and chemically aggressive materials. Air operated diaphragm pumps require no electrical connection so explosion-proof motors are not needed.

     Available From Theses Manufactures:

DEMING | ALL-FLO

back

CHEMICAL PROCESS PUMPS

ANSI standard centrifugal pumps for the chemical process industry. Standard ANSI dimensions allow easy installation of replacement pumps. ANSI Pumps provide flexibility, long service life and simplified maintenance. Top center-line discharge allows self venting of any air from the casing on start-up, and the back pull-out design allows for easy maintenance when used with a spacer style coupling. These units are available in a broad range of materials and sealing methods.

Use for the following applications: Chemical Transfer, Booster Service, Pollution Control

Available From Theses Manufactures:

Crane Deming Pump - Griswold Pump Co.

back

DRUM PUMPS

Portable Drum Transfer Pumps are designed for the safe transfer of chemicals from drums, carboys, tanks, or other containers. Their lightweight design allows them to be easily moved from one job to another. Drum Pumps are available hand operated, electric AC and DC motor driven, or air motor driven.

           Available From Theses Manufactures:

AMT - Beckson - Dismas Pumps -Lutz Pumps Inc. - Pacer Pump - Sethco

back

END SUCTION CENTRIFUGAL PUMPS

End Suction Centrifugal Pumps are designed for general service and are available as Motor Mounted units or Frame Mounted bare pumps or with Base, Coupling, Coupling Guard and Motor. End Suction Centrifugal Pumps are available in a variety of materials of construction. Flows range from 5 GPM to 4000 GPM with Heads to 780 Ft. TDH.

Use for the following applications: General Industrial Service, Air Conditioning, Booster Service, Recirculation, Cooling Towers, Filter Feed, Building Service, Municipal Water Service, Pollution Control, Liquid Transfer.

            Available From Theses Manufactures:

AMT - Berkeley - Crane Deming Pump - Ebara International - Griswold Pump Co.- Gusher Pump Co. - F.E. Myers - Oberdorfer - Price Pump Co. - Weinman Pump 

back

GEAR PUMPS

Gear Pumps are designed to handle a wide variety of materials from water to hard-to-handle fluids. Since Gear Pumps are positive displacement pumps they have good self-priming capabilities and are capable of handling liquids with a wide range of viscosities. Flows range from 1 GPM to 160 GPM with heads to 500 PSI.

Use for the following applications: Dispensing, Heat Transfer, Injection, Truck loading & unloading, Metering, Process, Recirculation, Sampling, Spraying, Transfer, Adhesives, Jet Fuel, Food & Beverage, Machine Lubrication

Available From Theses Manufactures:

Oberdorfer Pumps Inc.

back

HIGH PRESSURE PISTON & PLUNGER PUMPS

High Pressure Piston & Plunger Pumps are designed for use in commercial, agricultural, OEM,and General Industrial applications. Their low flow, high pressure performance characteristics are ideal for high pressure spraying of cleaning solutions,herbicides, insecticides, hot and cold water, water jet cutting, steel descaling, fire service, oil field service, water hydraulics and many other services where high pressure is required.

Flows range from 1 GPM to 120 GPM with pressures up to 5000 PSI.

Available From Theses Manufactures:

CAT PUMP - MYERS PUMP

back

IN-LINE CENTRIFUGAL PUMPS

The space saving design of the In-line Centrifugal Pump makes it ideal for a wide range of industries. These pumps can be installed in the piping system like you would a valve. The back pull-out design allows for the removal of the motor, motor support, packing box cover, and impeller as an assembly and eliminates removing the casing from the piping system. These units are available  in a wide range of materials, and sealing methods. Flows from 50 GPM to 1200 GPM and Heads to 390 Ft. TDH.

Use for the following applications: Water Booster Service, Circulation, Fuel Loading and Transfer, Chemical Process Service, Paint Service, Brine Service.

Available From Theses Manufactures:

Crane Deming Pump - Weinman Pump Co.

back

MAGNETIC DRIVE SEAL-LESS PUMPS

Magnetic Driven Seal-Less Pumps are designed to handle applications where the possibility of seal leakage cannot be tolerated. The pump end is isolated to prevent any possibility of leakage during operation or when the pump is shut down. Magnetic Driven Seal-less Pumps are available in a broad range of designs, materials of construction ( Metallic and Non-Metallic), as well as flows and heads.

Available From Theses Manufactures:

Caster Pump Co. - Little Giant Pumps - Price Pump Co. - Promag Sethco Pump 

back

METERING PUMPS

Metering Pumps are designed to deliver a precise amount of liquid over a wide range of pressures, in a set period of time. They are available in both reciprocating piston and diaphragm designs. Metering Pumps are available in a broad range of corrosive resistant materials of construction. Flows range from 3 GPD (Gal. Per Day) to 370 GPH ( Gal. Per Hour) with heads to 1000 PSI.

Use for these applications: Chemical Dispensing, Injection, Metering, Photo Processing, Plating, Process, Water Treatment.

         Available From Theses Manufactures:

FMI - LMI - Mec-O-Matic - Neptune - Pulsatron - Pulsafeeder

back

MULTI-STAGE SPLIT-CASE CENTRIFUGAL PUMPS

Multi-stage Split-Case Centrifugal Pumps are designed for efficient industrial service and are ideal for applications requiring higher heads than can be reached with the standard horizontal split-case pump. Flows range from 20 GPM to 650 GPM with heads up to 800 Ft.

Use for the following applications: Boiler Feed Service, High Pressure Booster Service and other high pressure applications

         Available From Theses Manufactures:

Crane Deming Pump - Weinman Pump Co.

back

REGENERATIVE TURBINE PUMPS

Regenerative Turbine Pumps are designed to produce a limited flow at heads considerably higher than can be obtained with a straight centrifugal pump. They are designed for handling non-abrasive, low viscosity liquids and are available in a wide variety of materials. Flows range from 5 GPM to 100 GPM with heads to 1150 Ft.

Use for these applications: Boiler Feed, Low Flow Booster Service, Condensate Return, Hydrostatic Testing, Fire System Jockey Pump, Spraying, Low Flow High Head Transfer of liquids.

   Available From Theses Manufactures:

MTH Tool

back

SELF-PRIMING PUMPS

Self-Priming Centrifugal pumps are designed for applications where the pump must be located above the source of water supply. These units are designed to lift the liquid from the source of supply up into the pump suction and can eliminate the air present in a dry suction line. Unlike a straight centrifugal pump Self-Priming pumps require no foot valve to maintain a prime on the pump. Flows range from 20 GPM to 3000 GPM and Heads to 350 Ft. TDH

Available From Theses Manufactures:

AMT - Berkeley - CH&E - Midland - Price - Weinman

back

SPLIT-CASE CENTRIFUGAL PUMPS

Split-Case Centrifugal Pumps are available in both Horizontal and Vertical Configurations. These units are designed for higher flows and higher heads than can be developed with a straight centrifugal pump. The horizontally split casing allows for easy maintenance. The impeller on this units is hydraulically balanced and is mounted between the bearings eliminating the overhung load of an end suction centrifugal, providing limited shaft deflection and longer bearing life.

Use for the following applications: General Water Service, Booster Service, Municipal Water Supply, Air Scrubbers, Condenser Water, General Industrial Services such as Continuous Caster Mold Water Pumps, Spray Water Pumps, Machine Cooling Water Pumps, Filter Feed and Backwash Pumps, and Cooling Tower Service.

Available From Theses Manufactures:

Crane Deming Pump - Weinman Pump Co.

back

SOLIDS HANDLING PUMPS

Solids handling centrifugal pumps are designed to handle large suspended solids found in most industrial and municipal waste water processing applications. Solid sizes range from 1-1/2" to 6" dia. spheres. These units can be provided in either vertical or horizontal configurations and cover the widest possible range of service conditions for industry and municipalities.

Use for the following applications: Sanitary Waste, Industrial Waste, Treatment Waste, Storm Water, Process Waste, Pollution Control, Cannery Waste, Meat Processing Waste.

Available From Theses Manufactures:

Crane Deming Pump

back

SUBMERSIBLE SUMP & SEWAGE PUMP

Submersible sump and sewage pumps are designed for pumping drainage water to storm sewers and raw sewage to waste water treatment plants. Submersible Sump & Sewage Pumps are commonly used for lift station service. These units are available as free standing units or as guide rail units with quick connect discharge connections for easy installation and removal. Flows range from 10 GPM to 8000 GPM with heads to 250 Ft.

 Available From Theses Manufactures:

ABS - BJM - Crane Deming - Ebara International - Hydromatic - Little Giant - F.E. Myers Sta-Rite - Weinman Pump

back

SUBMERSIBLE TURBINE PUMPS

Submersible Turbine Pumps are the pump of choice for water well applications as well as booster service and, when installed in a flow skirt,  can be used to pump from ponds and rivers for irrrigation. When installed in a deep well, they operate silently and efficiently delivering a high volume of ground water. Submersible Turbine Pumps eliminate the problems encountered with deep-set line shaft turbines by eliminating the long length shaft of shafting between the discharge head and the bowl assembly. These units are available from 4" dia to 15" Dia., with flows ranging from 10 GPM to 4500 GPM and heads to 1250 Ft. TDH.

Use for the following applications: Agricultural, Commercial, Municipal, Industrial

 Available From Theses Manufactures:

Berkeley - Crane Deming - F.E. Myers - Pleuger

back

VERTICAL PROCESS PUMPS

Vertical Process Pumps are designed to be space saving and eliminate the problems of  leaking seals and packing boxes experienced with other pumps. The immersed fluid end is always primed and with the unit mounted on top of the tank you can eliminate many of the housekeeping problems associated with other pumps. The Cantilever shaft design eliminated submerged bearings and provides dependable bearing life. These units are available in a broad range of materials from Cast Iron to Alloy 20. Flows range from 25 GPM to 3600 GPM with heads up to 150 Ft. TDH.

Use for the following applications: Coolants, Circulation, Metal and Parts Washing, Paint System Water Curtains, Water & Detergent Rinse, Pickling, Brush Scrubbers, Filter Feed, and Plating Tank Circulation.

 Available From Theses Manufactures:

Crane Deming Pump - Gusher Pump

back

VERTICAL SUMP PUMPS

Vertical Sump Pumps are designed for general sump dewatering applications. These units are available in a wide range of configurations in both Simplex and Duplex designs. These units can be supplied in a broad range of materials from Cast Iron to Alloy 20 and in settings up to 20 Ft. sump depth. Flows range from 20 GPM to 4000 GPM with heads up to 250 Ft. TDH.

Use for the following applications: Industrial Process, Industrial & Commercial Sump Drainage, Corrosive & Non-Corrosive Liquids, Dewatering Service, Pollution Control, Condensate Return, and a variety of other services.

 Available From Theses Manufactures:

Crane Deming - Weinman Pump - AMT - Lobee

back

VERTICAL TURBINE PUMPS

Vertical Turbine pumps are available in short-set (20 Ft. or less overall length) and deep-set configurations (depths to several hundred feet)  and offer a broad range of versatility and high efficiency in a wide range of capacities. Their multi-stage design allows these units to develop higher heads than are available from other centrifugal pumps. Flows from 25 GPM to 6000  GPM and Heads to 720 PSI.

Use for the following applications: Cooling Towers, Industrial Waste, Chemical Service, Solvents, Aircraft Fueling, Plant Water Supply, Industrial Process, Booster Service, Irrigation, Municipal Water Supply.

 Available From Theses Manufactures:

Crane Deming Pump - Griswold Pump Co. - Weinman - Floway

back

VERTICAL SEWAGE PUMPS

Vertical Sump & Sewage Pumps are designed for sewage and drainage application.  These pumps have important advantages for safe,  efficient handling of drainage, waste and process liquids. They are Positive Automatic Priming with pump impeller submerged in the liquid at all times. They offer Low Cost Installation and require Minimum Space, with sump basin safely below ground.  They eliminate Seal or Packing problems associated with other style pumps.   They are suited for a wide range of Applications and are available in a wide range of materials and construction.

Use for the following applications:  Industrial Process, Industrial Sump Drainage, Corrosive and Non-corrosive Liquids, Dewatering Service, Pollution Control and Condensate Return.

 Available From Theses Manufactures:

Crane Deming Pump

back