|
.
.
FG Series
Summit FG Series lubricants are
specially designed for rotary screw, vane and reciprocating compressors being used in the
food service industry. These lubricants are approved by the USDA for H-1 application
(lubricants with incidental food contact) and comply fully with the requirements of FDA
21CFR 178.3570.
The FG Series lubricants are formulated from the
highest quality synthesized hydrocarbon fluids available. The special additive system is
blended with the synthetic base-fluid to provide extended lubricant life and to protect
against wear, rust and corrosion. FG Series lubricants are extended life lubricants
and have the same software compatibility as
Summit SH® Series
Lubricants.
FG-100 is designed for use in rotary screw
compressors and applications requiring an ISO-32 lubricant. FG-200 is designed for
use in rotary screw compressors and other applications requiring an ISO-68 lubricant. FG-300
is designed for use in reciprocating compressors, rotary vane
compressors and other applications requiring an ISO-100 lubricant.
FG-500
is designed for use in reciprocating compressors and general
lubrication applications requiring an ISO-150 lubricant.
All grades are Kosher approved.
Available as: FG-100, FG-200, FG-300, FG-500
Top of page
HySyn FG
Summit HySyn FG series hydraulic oils are formulated specially for hydraulic systems
operating in the food service and packaging industry. These fully synthetic lubricants are
approved by the USDA for H-1 application (lubricants with possible incidental food
contact) and comply fully with the requirements of FDA 21 CFR 178.3570 and
are Kosher approved.
HySyn FG lubricants are fortified with oxidation
inhibitors as well as anti-wear additives to enhance the superior qualities offered by the
synthetic hydrocarbon base stock. They are extended life lubricants and have the same
excellent software compatibility as the Summit HySyn series hydraulic oils.
Available as: HYSYN FG-15, HYSYN FG-22 HYSYN FG-32, HYSYN FG46, HYSYN FG-68, HYSYN
FG-100, HYSYN FG-150
All grades are Kosher approved.
Top of page
R Series Summit
R Series synthetic
hydrocarbon refrigeration lubricants are designed to function
under severe service conditions.
These fluids have a very high viscosity index, contain no
paraffin and are compatible with various fluorinated refrigerants,
ammonia, methyl chloride and carbon dioxide. The Summit
R Series are completely miscible with petroleum-based fluids. These
products are USDA H-1 approved and have Kosher approval.
R-100
is designed to operate in rotary compressors requiring an ISO-32
viscosity rating.
R-200 is designed to operate in rotary screw compressors requiring
an ISO-68 viscosity rating.
R-300 is designed to operate in reciprocating compressors requiring
an ISO-100 viscosity rating.
Top of page
SBL
Summit
SBL synthetic
lubricants are formulated to provide maximum lubrication
protection and service for all positive displacement blowers
including Roots, Gardner-Denver, Sutorbilt, Duroflow and MD.
Advantages over petroleum lubricants include extended
lubricant life (up to 8,000 hours with oil analysis), reduced
operating temperatures, better corrosion protection, enhanced low
and high temperature lubricating properties, longer blower life
with reduced wear, and lower maintenance costs. The SBL synthetic
lubricants exceed the specification requirements for all of the
major manufacturers of positive displacement blowers and are compatible
with most commonly used seal materials. In
applications where food contact might occur, the Summit SBL-220F
and SBL-320F meet
the requirements of FDA21CFR 178.3570 and are Kosher approved.
Top of page
Syngear FG
Summit
Syngear FG
series
gear oils are formulated specially for gear systems operating in
the food service and packaging industry.
These fully synthetic lubricants comply fully with the
requirements of F.D.A. 21 CFR 178.3570 for lubricants with
possible incidental food contact and are Kosher approved in ISO
grades 150, 220, 320, 460 and 680.
Syngear
FG lubricants are fortified with oxidation inhibitors as well
as anti-wear/EP additives to pass the highest stages of the FZG
test.
They are extended life lubricants and have the same
excellent software compatibility as the Summit Syngear series
gear oils.
Top of page
The information contained in this document is the result of
careful testing in our laboratories, complemented by selected literature. It does not in
any way constitute a guarantee, nor does it serve as a license to operate any patent. Due
to widely varying conditions of product use, which are beyond our control, it is strongly
recommended that the product be tested for suitability.
back to Summit
|
